Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Best Of
-
Re: Grounding
I had the same comment to support recently. There's actually a post here mentioning a neutral with the plug but with a 240v plug there isn't a neutral. I did confirm with support that it�…2 -
Re: PGXL Power Wiring
@Geoff AB6BT is correct. When wired for 240 VAC there is no neutral connection. Dave wo2x1 -
Anniversary.
Six years of great pleasure operating my 6600M. In 57 years as a radio amateur, I do not think I have operated any other transceiver as my primary rig for as long.2 -
Re: Is there any way to interface a PTT switch to a PC running SmartSDR?
My working solution came from a pointer Mike provided and the second screen shot Al provided. I really appreciate the guidance they provided. It turns out all I needed was a PTT switch and a DB9 seri…1 -
Re: Is there any way to interface a PTT switch to a PC running SmartSDR?
Here is another way to do PTT from a remote laptop See morse code key to usb adapter – cwmorse.us It was meant for CW Key but works for PTT also. And then configure SSDR CAT AL, K0VM p.s. RTS <>…2 -
Re: WSJT-X / JTDX stops sending TX Audio to the Radio after sitting idle for a while.
Oh here's an update on the computer and 4 monitors. For the most part it behaves itself fairly well. I have found about 5 times whenever windows does and update it reinstalls the video card as a…1 -
Re: How to track frequency using CAT from a Mac running SmartSDR for Mac to a PC running NMM?
Hi Randy Just run SmartSDR CAT on the PC with N1MM and have it connect to the radio. Next, using SmartSDR CAT, add a Serial Port for N1MM and have N1MM connect to that serial port. Unlike other radio…1 -
Re: How to track frequency using CAT from a Mac running SmartSDR for Mac to a PC running NMM?
Hi Mike, I am running remote. When running SmartSDR CAT on a PC, does each computer have its own configuration for CAT? Please confirm this is correct. When I operate locally to the radio and load Sm…1 -
Re: How to track frequency using CAT from a Mac running SmartSDR for Mac to a PC running NMM?
Yes, SSDR CAT settings are stored on the PC that is running SSDR CAT. To talk to N1MM, SSDR CAT must run on the same PC that N1MM is running on. If you wish to run N1MM on the remote PC, than SSDR CA…1 -
Re: WSJT-X / JTDX stops sending TX Audio to the Radio after sitting idle for a while.
"disable the Nvidia card" and "high performance which disables CPU hibernate and sleep" I second both of these steps!1
