Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Best Of
-
Re: Version3.7.4
Yes, you can go directly to 3.10.10 from any previous version. If you find 3.10.10 unsatisfactory for your needs, you can also go back directly to 3.7.4. AL, K0VM6 -
Re: SSDR v3.9.18
I received reply from Ken and he pointed to Release notes about Maestro Smart Control (about my issue with 2nd panadapter open and showing extra empty slice B". "This is a known software de…5 -
Re: 8600 Time Server
Easiest is just use the radio time server but if keeping accurate time when the radio is off is important then I do not favour this method personally i.e. using Control Panel / Clock & Region / ……6 -
SmartSDR 3.8.19 Squelch Thank You (THREAD)
Yes, Big thanks! ❤️5 -
new tower site 275 feet from my shack
with the new purchase of 8600M I'm building new tower. The tower will be 275 feet from the shack. I will be mounting the AGXL on the LM-470. What type of LAN cable can I use to maintain and bury goin…5 -
Re: Flex Smart SDR Version 3.7.4 Will not Install
Who can tell? Windows Event Viewer may have the answer for you. I expect you will get some recommendations on here. Meanwhile a) check you don't just have a corrupted installer by d/l a second time a…6 -
Re: Loosing CAT ports nr after reboot
I found the problem. I tested once a utility from ELTIMA that manage virtual ports. After a while I did uninstall the program properly but apparently the .dll and .sys where still present. It was not…5 -
Configuring your FlexRadio "Dream Station" Equipment - FlexRadio, PGXL, TGXL, AG.
The Document regarding Configuring the FlexRadio "Dream Station" (FlexRadioi, PGXL, TGXL, Antenna Genius) has been updated to reflect the latest Software/Firmware Releases for all four piec…7 -
Re: Ethernet Interlock: Description of ANT Interlock
Try: interlock not_ready <id>5 -
Re: How does one switch between two Antennas on one band with 1x3 TGXL?
Perfect. Thank you. Was able to get 1.1.20 from 4O3A web site. 73, Ken5
