Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
Best Of
-
Re: 6500 strange behaviour on SSB TX
Yes, if your radio were really local, a factory reset might be the next thing to try! Lightning or other surges can lock up the radio this way. So maybe you need to "bite the bullet" 73 Mar…1 -
New Card Old Version Software
I have had detrimental problems ever since the 8000 series radios came into existence with the Smart SDR software that included those radios. Prior to that I had zero issues everything was great. Is …1 -
Re: VARA/Winlink Express Setup
It's actually really easy but not sure where to start as you didn't give us any info to work off or how far you have gotten before running into issues. You said a 8600M but you also didn…1 -
Re: Controlling Peripherals via USB in FLEX
The USB connector on the back can be used for multiple purposes By adding an FTDI RS-232 / USB adapter to send Kenwood formatted CAT data to devices such as amplifiers that require frequency informat…2 -
Re: AetherSDR — Open-Source Linux Client for Flex Radios
I ran a test Yesterday, I ran the AetherSDR Pi AppImage 0.7.2 on my Raspberry Pi 5 8Gig Ram. It ran surprisingly VERY WELL. On the same Pi at the same time, I also run my Node-Red server and the Free…1 -
Re: Coax suggestions for external GPS antenna
Thanks Mike. Its highly under-rated. Not as easy to find since cord cutting. I used the already installed RG6 from the cable tv era run to the attic then out through the roof vent to feed the antenna.1 -
Re: AetherSDR — Open-Source Linux Client for Flex Radios
I have noticed this but this is the same with SmartSDR. Something to look at, What is your "DISPLAY" settings at for the "Rate" and "FPS" having these set at factory or …1 -
Re: New 60 meter frequencies
Just another two cents on this … when the new Director of Software at Flex, Hayley Boynton was interviewed when v4 was released, she described what their concept for s/w development going forward was…1 -
Re: Any news on Aurora shipments?
@Mike-VA3MW there was nothing 'replaced' by other laws (?) DARC: "The controversial Articles 3.3i and 4 of the Radio Equipment Directive 2014/53/EU (RED) will not be activated." h…1 -
Re: Any news on Aurora shipments?
Yes, that was replaced by other laws.1




