Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Any update on Tuner Genius?

2»

Answers

  • W2PP
    W2PP Member ✭✭

    How odd I don’t recall posting twice a day apart! Guess I’m getting old! Thanks for the update. Yes we do live in strange times. The vaccines can’t come fast enough!

    Peter

  • KF4HR
    KF4HR Member ✭✭

    Thanks for the info and update Mack.


    Butch

    KF4HR

  • Mack

    In my Station. using a Flex6600M with a PGXL with an Palstar HF Auto Tuner I use a LP-100A Power Meter to inhibit the PTT key Line in my PGXL to Trigger the PTT at Customized SWR levels ( No more than SWR of 1.2 to 1.3 Max just as added protection for the PGXL

    With the TGXL Tuner Genius will there be a User defined SWR Limit similar to my LP-100A way of doing things with my PGXL and Palstar HF Auto to make sure there is no way one can can activate the PGXL as a safety measure if SWR rises above a predefined limit for added protection, been very successful here to insure the SWR is always low and the response time of the LP-100A is very fast with also an Audible Alert to alert user if SWR rises above a predefined limit

    Hope Tuner Genius is still on Target for 2021 Q1 !


    Thanks

    Mike WB6DJI

  • Mack

    In my Station. using a Flex6600M with a PGXL with an Palstar HF Auto Tuner I use a LP-100A Power Meter to inhibit the PTT key Line in my PGXL to Trigger the PTT at Customized SWR levels ( No more than SWR of 1.2 to 1.3 Max just as added protection for the PGXL

    With the TGXL Tuner Genius will there be a User defined SWR Limit similar to my LP-100A way of doing things with my PGXL and Palstar HF Auto to make sure there is no way one can can activate the PGXL as a safety measure if SWR rises above a predefined limit for added protection, been very successful here to insure the SWR is always low and the response time of the LP-100A is very fast with also an Audible Alert to alert user if SWR rises above a predefined limit

    Hope Tuner Genius is still on Target for 2021 Q1 !


    Thanks

    Mike WB6DJI

  • Mack W4AX
    Mack W4AX Company Adviser ✭✭

    @mikeatthebeach . I just finished a video call on the TGXL. It is still on track to begin shipping this quarter.


    The TGXL has a setting for the desired tuning SWR when conducting a tune operation. It will not inhibit transmission if the SWR is above a defined level. Those protections are built into the PGXL and FlexRadio. The TGXL also has protections to prevent damage from high RF voltages or currents. These protections have been thoroughly tested. However, if you want belt and suspenders, then keep the key line on the LP100A to interrupt keying of the FlexRadio.

    73,


    Mack

    W4AX

  • WX7Y
    WX7Y Member ✭✭✭
    edited February 10

    Hi Mack, If I read your Email correctly it brings up some red flags.

    Couple Question,

    1- what if your not running a FLEX 6000 series Radio and/or a PGXL that have the built in protection or the PGXL protection fail, what protection does the TGXL have for "belt and suspenders" radios and Amplifiers? doesn't sound like there is any protection for the legacy Amps or Radios.

    2- what if your running a FLEX 6700 and a AL82 old type AMP along with the TGXL what is protecting the AL82 if the Antenna system suddenly fails?

    If this is how it is Then it is very sad to hear for such a long wait for the Tuner not to have the protections asked for available for legacy Amplifiers or radios Including the FLEX5K and 3K.

    Kind of limit's the buyers base if you ask me by not having the PTT line control disconnect available for the Legacy AMP's or ANY AMP that doesn't have a self resetting SWR limit switch when the Tuner starts to retune. I see all kinds of older AMP's burning up Band Switch's and Tubes that could be eliminated if there was a AMP Key line disconnect built in.

    could be solved with a couple dollar worth of parts and a few lines of Code

  • Mack W4AX
    Mack W4AX Company Adviser ✭✭

    Let me correct a previous statement after speaking with the software/firmware developers. Yes, the TGXL WILL interrupt the PTT line if it goes into protection mode. Therefore legacy amplifiers will be protected.

    Mack

    W4AX

  • WX7Y
    WX7Y Member ✭✭✭

    Thanks for clearing that up Mack, that really bothered me to hear it wouldn't have this GREAT and in many users case eyes not just a feature but a necessity.

    This is what makes the HF-Auto I run here as my backup station Tuner and the AT-AUTO as the primary Station Tuner.

    Thanks again

    Bret

    WX7Y

  • W2PP
    W2PP Member ✭✭

    OK, so that is good news on the PTT line.

    How does the PGXL and the TG communicate, is it over LAN???

    I ask because I am using two ICOM radios right now with the PGXL. The RF detection is how the PGXL knows what

    band I am on. So, if the PGXL detects I'm on say 20 meters with a quick DIT, does that information immediately get sent over to the

    PGXL via LAN? I don't see any other way for that communication to happen.

    Perhaps the PGXL operating software does the communicating?


    Any update on the PGXL operating software's ability to decode CIV Icom data?

    Peter

    W2PP

  • Richard
    Richard Member ✭✭

    Mack,

    It has been a couple of weeks and no new updates or status changes. Is the TGXL still expected to ship the first units out by the end of March (1st Quarter 2021)?

    Richard

    N4RWG

  • Mack W4AX
    Mack W4AX Company Adviser ✭✭

    Yes still on schedule.

  • KF4HR
    KF4HR Member ✭✭

    Mack is there estimated date as to when Flex will start accepting pre-orders for the TG-XL? Later in 2021 perhaps?

  • Mack W4AX
    Mack W4AX Company Adviser ✭✭

    Please watch my QSO Today ham fest presentation on March 13th. Details there.


    Mack

  • Mack W4AX
    Mack W4AX Company Adviser ✭✭

    Please watch my QSO Today ham fest presentation on March 13th. Details there.


    Mack

  • Mack W4AX
    Mack W4AX Company Adviser ✭✭

    Please watch my QSO Today ham fest presentation on March 13th. Details there.


    Mack

  • KF4HR
    KF4HR Member ✭✭

    Will do. Thank you Mack.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.