Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Flex 6500 Start up Anomaly

Bob KN4HH
Bob KN4HH Member ✭✭✭
in FLEX Series (Legacy) Radios

During start up of my 6500, I encounter a variety of errors. Smartsdr will freeze and must completely remove power to re boot the radio. Another error is no boot up at all. The last error is shown on the attached image. When I attempt to boot up the radio, I get this message on the 6500

IMG_4259.jpg

The radio and PC are hard wired via my home newtwork.

Any troubleshooting suggestions appreciated.

Bob, KN4HH

Comments

  • KD0RC
    KD0RC Member, Super Elmer Moderator

    Hi Bob, I would submit a help desk ticket. Flex Support will know what this means.

  • Bob KN4HH
    Bob KN4HH Member ✭✭✭
  • Bob KN4HH
    Bob KN4HH Member ✭✭✭

    Thanks. Will do.

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    When I see that, it is usually related to a low voltage issue. Try just unplugging and replugging the DC cord on the back of the radio a few times and see if it goes away.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories