Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Boot up problem

KB4OIF
KB4OIF Member ✭✭
in FLEX-6000 Signature Series

I have a problem with my 6600M booting up. The power button flashes 4 times and it will not boot up. I have seen a chart that says what it is on here somewhere, but can 't find it. I

Comments

  • Mike Steventon
    Mike Steventon Member ✭✭✭

    What colour is the led button when it flashes?

    Mike

  • KD0RC
    KD0RC Member, Super Elmer Moderator

    Check your power supply voltage. 4 red flashes indicates an overvoltage condition.

    If the voltage is in spec (13.8 VDC +/- 15%), you should probably submit a help desk ticket.

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    When the red LED on the front of a FLEX-6400/FLEX-6600 blinks four times, it is an indication that the voltage input to the radio is over the threshold (16V).  Power control will remove power from the  radio and wait for a restart.

    You need to check your power supply voltage.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories