SmartSDR v3.4.23 and the SmartSDR v3.4.23 Release Notes | SmartSDR v2.8.1 and the SmartSDR v2.8.1 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes
Power Genius XL Utility v3.7.28 and the Power Genius XL Release Notes v3.7.28
Tuner Genius XL Utility v1.1.16 and the Tuner Genius XL Release Notes v1.1.16
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Q5 Signals Multi Band Transverter
Thanks to Corey at Q5 for getting me this transverter quickly. It was so well packed and an amazing piece of work.
This is a 5 band transverter in a single box that works so well with any Flex 6000 series radio. If you are ordering one, you want these settings. If you want Split IF, you can have that as well, but I was good with common IF.
If you want it for 440 FM, give him a call to discuss your options since you will want about 10Mhz band spread. The Flex transverter port can handle that, but there are transverse limitations.
The transverter also makes use of the USB port on the back of the radio to handle automatic band changing. Cable included all ready to go.
Now, I can be on 1.8Mhz all the way to 1296Mhz with a neet and tidy station. You can even hide this in another room or close to the antennas making it XYL friendly.
That looks sweet. Congratulations on your new arrival.-1
DC to Daylight!! Very cool Mike!0
Is there a single antenna that works on all these bands ?0
Either a Create Designs CLP5130 Log Periodic or various Discone antennas.
An all band antenna could be made to work, but after spending over $2,000 for the transverter (plus whatever you have in Flex gear), a compromise antenna seems like a waste.
Having said that, a discone or something to give a quick omnidirectional view of band activity might not be a bad idea...0
Q: "Is there a single antenna that works on all these bands ?"
Well, yes... Discones and Log Periodics.
But, "Is there a single antenna that works WELL on all these bands?"
Probably not....but single-band long yagis or quads are available that out-perform any multi-band antenna on these bands.0
A log periodic is an antenna that doesn’t work very well over a broad range of frequencies.0
Well......a LP is better than a discone. LOL.
However, my Tennadyne T-11 LP performed somewhere between a 2 element and 3 element yagi, on all bands, 20-6 Meters with pretty good F/B ratio. (I agree, 3 elements on 10 or 6 is not a high-performance antenna.)
It held its own pretty well against my buddy's TH11DXX on 20 and 18 Meters, but on 10 he had 5 elements and waxed my tail! (Besides, he was at 60 ft. and I was only at 38 ft.)
If a T-28 or something like that was the ONLY VHF/UHF antenna I could put up, I might get one, but it is so easy to get higher gain stuff on VHF/UHF it seems a waste.0
Each one's choice of LPDA or high gain Yagi depends on their use. I have both and find that much of the time the LPDA is the better performer because the long boomers are much too directional. If communications are required for DX stations in a narrow direction, obviously the Yagi is best. On local nets some stations are too weak to be worked by them and the LPDA performs better. It is interesting to view both antennas on separate Flex panadapters (2x 6700's) and see most signals (obviously from different directions) stronger on the LPDA.
ambroinaz Member ✭✭I didnt realize that Cory provides that USB/Serial cable for band switching! What did you have to do on the Flex side to get that working for auto-band switching
Butch Member ✭✭✭
Ideally single band long boom yagi's for each of these 5 bands would be great, assuming you have the tower and mast real estate.
There are many Log Periodic 144-1296 Beams available. I have the one from Wimo.
They give you pretty good performance though.0
I have a problem with this tranverter that's been present ever since I bought it. I think Corey doesn't think it`s him and I agree. When I go to 144 and transmit, the repeater doesn`t hear me. Then I switch to 440, but don`t transmit or do anything. Then I switch back to 144 and it works. Any one else notice this? Seems like the TX1 line doesn`t work the first time around.0
Can you post screen shots of SmartSDR while you are trying to do this. Often, we see that the offset is set incorrectly.
We want to see the shot when it isn't working and a shot of it when it is working.0
I've been looking at this transverter. It's pricey until you start looking at the alternatives. So, questions:
1. Can it easily be used for satellite work?
2. I assume a USB parallel cable can seamlessly switch between transverters with the proper application of magic on the Flex side.
3. How much of 70cm and 23cm do you get?0
This is by far the best transverter out there. Great performance numbers. Well built and has the cleanest RF out. You do get what you pay for.
- Sort of. It does not run Full Duplex, so you need some other receiver path. Personally, I use a VHF and a UHF transverter at the same time.
- Yes, thanks the the USB to Bit Map switching.
- Ask Q5 signals for the operation bandwidth. UHF is a bit tougher since it requires up to 20Mhz of bandwidth.
I've been using the Five Bander, S/N 115, for well over a year with five separate yagis on a 66' tower and above tree line on all the bands. It interfaces easily with my FLEX 6500. From my hilltop here in northwestern South Carolina, I've worked over 700 miles to New England and Ontario with it on 144, 222, and 432. It's very stable, and I've even worked FT-8 successfully on 1296. Great performance and great assistance by Corey at Q-Five.
Leave a Comment
- 19.8K All Categories
- 177 Community Topics
- 2K New Ideas
- 367 The Flea Market
- 6.6K Software
- 5.6K SmartSDR for Windows
- 107 SmartSDR for Maestro and M models
- 269 SmartSDR for Mac
- 210 SmartSDR for iOS
- 200 SmartSDR CAT
- 137 DAX
- 330 SmartSDR API
- 8.1K Radios and Accessories
- 6.6K FLEX-6000 Signature Series
- 673 Maestro
- 35 FlexControl
- 803 FLEX Series (Legacy) Radios
- 550 Genius Products
- 312 Power Genius XL Amplifier
- 200 Tuner Genius XL
- 38 Antenna Genius
- 160 Shack Infrastructure
- 105 Networking
- 277 Remote Operation (SmartLink)
- 108 Contesting
- 418 Peripherals & Station Integration
- 103 Amateur Radio Interests
- 696 Third-Party Software