Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Red light blinking thrice boot failure & resolution

Options
Jeff Schwartz
Jeff Schwartz Member ✭✭
in FLEX-6000 Signature Series

I post this since I’ve seen a lot about SD card failures and the dreaded three red blinking light failure to boot situation in the past.

My 6600M developed the dreaded boot failure with the three blinking red light end point one day last week. Cold reboots and resets did not change the situation with continued failures to boot at lest six times. I decided to unplug my Ethernet cable at which point it booted up just fine without a hitch. After shutting it down and plugging the Ethernet cable back in it booted up just fine again and so far continues to boot up normally as it has for the past couple of years.

I’m not sure what that was all about but the Ethernet cable temporary removal solved the problem for me and perhaps may be a simple solution to someone else’s dreaded 3 red blinking light non booting situation in the future short of needing a new SD card.

Jeff Schwartz / KI0KB

Comments

  • Rich McCabe
    Rich McCabe Member ✭✭✭
    Options

    I have a new SD card and mine still has random reboots. Can just be sitting without even SSDR running and snap and reboots.

    Happens every week or two.

  • aa3ssradio
    aa3ssradio Member ✭✭
    Options

    I was getting random reboots and cured it by finding out I had a HT nearby that was sending out an APRS bacon and every once in a while the RF got into the Flex and rebooted it.

  • Arnold Goldman
    Arnold Goldman Member ✭✭✭
    Options

    mine just started the SAME thing will try unplugging the ethernet cable next week my radio has been sent back THREE TIMES already in the past year and a half

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    Options

    @Arnold Goldman If your radio has been sent back 3 times, can you email me the details please so I can have a manager look into this for you.

    info@flexradio.com

    73

  • Arnold Goldman
    Arnold Goldman Member ✭✭✭
    Options

    its on the way back to you for the FOURTH TIME AS WE SPEAK

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories