Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

WSJT-X video of Mike.

Cees
Cees Member ✭✭
in FLEX-6000 Signature Series


Hi members,

In the WSJT-X video, Mike shows how he completes the CAT at the beginning of the vid. As RIG: FLEX6000 and as Network Server: 127.0.0.1:503.

I don't understand how he got that number and, more importantly, what to fill in there.

image.png


Comments

  • Chris DL5NAM
    Chris DL5NAM Member ✭✭✭

    125.0.0.1 = it's the local host on every PC

    5003 = is the select port - you have to create b4 a CAT port in SDR CAT like this


    catt.jpg

    73 Chris DL5NAM

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Think of the IP address and Port as a number number and an extension. It is a pretty good analogy.

    In the screen shot you posted, I was connecting to port 5003 on 127.0.0.1. 127.0.0.1 is a Local Host or an 'in house' phone call. :)

    In SmartSDR CAT I had set up a CAT port for Slice B on port 5003. When WSJTx sends a command to the radio, it will use this phone extension to tell the radio something.


    Make sense?


    image.png


  • Cees
    Cees Member ✭✭

    A little **** of me, a little further Mike shows what you need to do with the TC port value in CAT to enter Network Server value. Thank you for your quick response.

    73, Cees, PA3CVI

  • Cees
    Cees Member ✭✭

    For sure, Mike.

    Thanks

  • Cees
    Cees Member ✭✭

    @chris

    Tks Chris

  • Cees
    Cees Member ✭✭

    Hi Mike,

    I have some problems with the port assignments for the PTT, only ports 1, 3, and 5.

    I'm not able to match the port assignment in WSJT-X and CAT.

    What is going on here?

    Cees, PA3CVI

    image.png


    image.png


    image.png


  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator

    Ceres,


    the port number does not need to match Mike’s video.


    If you create PTT port Com 5 then in the software (WSJT-X for example) you select Com 5 for PTT.

    The port number does not need to be a specific number but whatever you create in SmartSDR CAT has to match in the digital mode program setup.


    73

    Dave wo2x

  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator

    Also, when creating a PTT port for a software program to use it should be a virtual port and not existing port.


    73

    Dave wo2x

  • Cees
    Cees Member ✭✭ 
    Thanks David for your answer.
 Maybe a **** question, 
how do I make a virtual comport?


  • Cees
    Cees Member ✭✭

    Thanks David,

    your comment:

    If you create PTT port Com 5 then in the software (WSJT-X for example) you select Com 5 for PTT.


    The problem is that in wsjt, for example, I can only select the USB ports and not, in my case, the virtual port 5.

  • Cees
    Cees Member ✭✭

    Sorry David, forget my last comment, is irrelevant

  • David Decoons, wo2x
    David Decoons, wo2x Member, Super Elmer Moderator

    When creating the PTT port use Flex VSP instead of existing.


    Dave wo2x

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories