Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Low signal gain until you sign on a second device

william
william Member
edited April 2020 in Maestro
I'm using a Flex 6600 with the Maestro Interface.  When I turn on the radio there is little to no signal.  If I turn on a second device (iPhone) the signal pops up to normal and I hear and can work stations on both units.   If I disconnect the iPhone, I lose signal again on the Mastro.  The same behavior occurs if I log on to the phone first and then the Mastro.   The gain is set at 8+ on all devices.  The behavior is the same with or without an external tuner.   I have 1GB ethernet service to the radio and the Maestro unit (hard wired).  Very little packet loss. Low SWR and if I switch out the Flex with my ICOM everything works correctly - so no problem with the antenna, feedline or tuner. Any ideas why this occurs? 

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited April 2020
    Hi William

    Are you sure the right antenna is selected?  It sounds like when you turn on the iPhone it selects the correct antenna.

    Mike

  • william
    william Member
    edited April 2020
    Michael, 

    I think the antenna switching circuit is broken.  How do I send the radio back for repairs, it's under warranty?
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited April 2020
    Done, I have converted this to a support ticket.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories