Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

where is the secret hiding place for FlexSatPC ??

James Kennedy-WU5E
James Kennedy-WU5E Member ✭✭✭
edited June 2020 in FLEX-6000 Signature Series
I want to use my Flex 6600 for satellite also , I see dropbox link to download it where is the secret hiding place for FlexSatPC?
Jim
WU5E

Answers

  • Robert Lonn
    Robert Lonn Member ✭✭
    edited April 2020
    https://www.flexradio.com/downloads/flexsatpc-using-satpc32-with-frs-radios/
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited June 2020
    Hi Jim

    You use the normal SATpc32.  

    In SmartSDR CAT, create 2 Serial ports.  One for Slice A - VHF and one for Slice B for VHF.

    Then, in SATpc32 you want to create Radio 1 to address Slice A Serial Port and Radio 2 to address Slice B's radio port.  

    For each radio, select the Radio as a Kenwood TS2000 and you can use any baud rate, but 4800 is fast enough.

    I don't have it fully setup yet, but that should work.  

    I'm not sure about how to setup Autom Rx/Tx change and I think that you can leave Satellite Mode unchecked.

    I'm sure there are others here that can show you their setup.

    Mike 
  • James Kennedy-WU5E
    James Kennedy-WU5E Member ✭✭✭
    edited April 2020
    i have a register copy of SATPC32 from amsat, thanks for the reply , this is pissing me off, guys keep putting the same link that PDF file, I email the Author he might respond . I did build two comports for SATPC32 and they are working. Im thinking that since the name Flex was in the name of the software this is why it's not on your site.
    there should be a API to install. thanks for your time.
  • Mack
    Mack Member ✭✭✭
    edited April 2020
    Jim,

    Contact Dave, W0DHB, the author for a copy of FlexSatPC32. I don't want to list his email here without his permission but good in QRZ.

    Mack
    W4AX

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories