Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

New PGXL - No Cord, No Manual?

Mike Presnell
Mike Presnell Member
edited May 2020 in Third-Party Software
I just spent a small fortune on a PGXL.   It seems to have arrived safely, but was surprised that with the exception of the amplifier, it was a completely empty box!    No power cord, no start-up guide, no manual, no warranty card, no receipt.     What did you others get with yours??   ... and dont tell me to call them, I tried that and nobody answers the phone ;)

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited February 2020
    Hi Mike

    Yes, there should have been a cord and  I believe a Quick Start Guide.  If you can email orders@flex-radio.com they will take care of you.

    The full manual can be found in the downloads area.

    I saw you call, but we were all on the phone when you called and we are so sorry.  We do not put people on hold when the phone rings.  

    https://www.flexradio.com/downloads/ and look for PGXL (it is hard to copy the direct link)

    I can't do much about the cord at the moment.  However, a regular computer cord will get you going, at least at 1/2 power until we get you the heavy duty cord.

    Mike

  • Mike Presnell
    Mike Presnell Member
    edited February 2020
    Thanks Mike,  I will send the email.  I guess I was missing whatever is the "standard package" as it didnt include anything.  

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited February 2020
    I sent an email for them for you.
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited February 2020
    Hi Mike

    I just heard back from Katie.  She put one in an overnight courier for you.  You should get it Monday.

    Mike
  • Mike Presnell
    Mike Presnell Member
    edited February 2020
    I have 6 Amplifiers in my shack now, and a handful of others I have already sold/trade.  I have to admit,  this PGXL and it's integration with SmartSDR is really cool!!!
  • Ian1
    Ian1 Member ✭✭
    edited May 2020
    Mike I think you will be impressed when you get it working. The integration is excellent mine has been flawless. My only issue has been the loudness of the fans. Ian Km4cqg
  • Ria
    Ria Member ✭✭✭
    edited March 2020
    I bought a cord set with a molded plug for mine. 

    https://www.monoprice.com/product?p_id=40081&gclid=Cj0KCQiA1-3yBRCmARIsAN7B4H0fAXUo2PUzxNoIXyz0AHmde_SA9zOlfOmFR3d0b8Hf4QNM2NANa20aAtQ4EALw_wcB
  • Sergey KN7K
    Sergey KN7K Member ✭✭✭
    edited March 2020
    It says 15A, as far as i know you should get 20A
  • HCampbell WB4IVF
    HCampbell WB4IVF Member ✭✭
    edited March 2020

    Not really.  The factory cord is 14 AWG with C13 connector too.  Which surprised me at first, but have not heard of any problems. 

    Mike, if you go with the factory cord, it only comes with the C13 connector for the amp side, and you'll have to get your own NEMA plug for the other end. 

    Howard




  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2020
    Since the amp cannot draw more than 10 amps, 14 AWG is properly rated for the amp.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories