Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Maestro slices

Options
Bob G W1GLV
Bob G W1GLV Member ✭✭
edited June 2020 in FLEX-6000 Signature Series
Radio - 6500 Software Ver. - 1.8.4 3 problems to report on the Maestro 1. When I initially turn the unit on, I get a pan adapter, spectral info and an empty slice flag. The radio was shutdown with a frequency of 14.076 for JT65 work. If I select the slice flag enumerator (A) sometimes it will correct itself and show the info the radio was shutdown with. 2. The XIT function does not work when a single slice is present. Selecting XIT with the red lite on, turning the frequency knob to displace the frequency causes the slice frequency to change. Adding a second slice on the same pan adapter, causes the XIT function to work normally. 3. On initial startup after selecting Ver. 1.8.4, the update info will read (3 of 4) please wait. After indicating approximately 1/4 of update the radio will start. Reverted back to version 1.7.32, everything is normal. Thanks

Comments

  • Al K0VM
    Al K0VM Member ✭✭✭
    edited June 2020
    Options
    Bob,
      Item 2.  New to 1.8, wIth a single slice open, the B knob will control the RIT or XIT of VFO A

    AL, K0VM
  • k3Tim
    k3Tim Member ✭✭✭
    edited June 2020
    Options
    1 + 3 sound like a WiFi / E-link error at startup. I've seen similar when I've been the network configuration around. #3 seems harmless although it causes one to pause in brief anxiety.
    Good luck on 1.7.32 it's 1.8.4 at the station here as items 1 & 3 are no-issue and #2 works as Al points out.
     
  • Bob G W1GLV
    Bob G W1GLV Member ✭✭
    edited December 2016
    Options
    Not the case. !.7.3 starts up correctly everytime.
  • Bob G W1GLV
    Bob G W1GLV Member ✭✭
    edited December 2016
    Options
    Is that documented anywhere?
  • Al K0VM
    Al K0VM Member ✭✭✭
    edited December 2016
    Options
    I think it should have been in the release notes but I don't see it .. It is in the change log included with 1.8.4.   I haven't looked in the user guide.

    AL, K0VM
  • WX7Y
    WX7Y Member ✭✭✭✭
    edited July 2016
    Options
    Did you try doing a factory reset?
    That may be the cure, it was for me anyway.

    Bret
    WX7Y

  • Bob G W1GLV
    Bob G W1GLV Member ✭✭
    edited December 2016
    Options
    Thanks for the info.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories