Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?


SmartSDR v4.0.1 and the SmartSDR v4.0.1 Release Notes

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

new+flex1500+win7+not+starting

keeth france
keeth france Member ✭✭
edited March 2017 in FLEX Series (Legacy) Radios
New flex 1500, powersdr v2.3.5. and v2.7.2. but no display on monitor. Power on sends "fatal errorimage" message. 

Comments

  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited March 2017
    Based on the error message, the Flex1500USB.dll is either missing or the FLEX-1500 driver did not install properly and the DLL cannot communicate with the radio hardware..
  • keeth france
    keeth france Member ✭✭
    edited March 2017
    The flex1500usb.dll is missing.
    Which directory?
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    Program files/FlexRadio Systems/PowerSDR v2.7.2

    But I suspect you will find it there and the issue is your FLEX-1500 streaming USB drivers are not installing properly because you have the same problem with multiple version of PowerSDR.
  • keeth france
    keeth france Member ✭✭
    edited March 2016
    yes. deleted 2.3.5. reboot, reinstalled 2.7.2 from web not disk,reboot, same error msg. 
  • keeth france
    keeth france Member ✭✭
    edited March 2016
    i believe system still seeing 2.3.5 even though deleted
  • keeth france
    keeth france Member ✭✭
    edited March 2016
    How can we clean this up?
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited December 2016
    I have reopened your HelpDesk ticket so we can continue addressing this issue.
  • keeth france
    keeth france Member ✭✭
    edited March 2016
    Thank you. Have a nice day

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories