Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v4.1.3 and the SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Missing something simple

Kevin Mahoney
Kevin Mahoney Member ✭✭
edited June 2020 in FLEX-6000 Signature Series
I am sure that I am missing something here or in the book but.....If I am tuning my amp and/or antenna tuner how do I send a signal out besides using my voice on SSB or a key? (6300)

Answers

  • [Deleted User]
    [Deleted User] ✭✭
    edited April 2020
    Tune Button
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    On the TX Panel...right under the power output and SWR meter is a button labeled "TUNE"   press it and it will toggle a tune signal on and off.  It is centered at zero-beat on SSB.

    You can set the "tune power output" in the Settings>Radio Setup>Transmit tab...

    Ken - NM9P
  • Kevin Mahoney
    Kevin Mahoney Member ✭✭
    edited June 2020
    Can I do it without the built in ATU doing it's job? 
  • Mickey N4MB
    Mickey N4MB Member
    edited December 2016
    Click on the TUNE button in the TX panel on the right in SmartSDR.
    You can adjust the TUNE power with the RF Power slide while transmitting or in advance at the Settings=>Radio Setup=>Transmit screen... Tune Power is at the bottom of that frame.
    73,
    Mickey N4MB
  • Steve N4LQ
    Steve N4LQ Member ✭✭
    edited September 2015
    wow
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited December 2016
    The ATU button activates the internal tuner and puts it in tune mode.  If you want to run without the internal tuner, hit the BYP (bypass) button .  Then if you hit TUNE it just sends out a tuning carrier.

  • Mickey N4MB
    Mickey N4MB Member
    edited December 2016
    Clicking on BYP bypasses the tuner.
  • Kevin Mahoney
    Kevin Mahoney Member ✭✭
    edited October 2015
    got it, great help, thaks

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories