Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

6300 v1.3 not keying amp

Andreas Junge
Andreas Junge Member ✭✭
After upgrading to v1.3 the 6300 stopped keying the amp (RCA connector).

I have enabled "RCA TX1" in the setup.

73, Andreas, N6NU 

Comments

  • Jim K4JAF
    Jim K4JAF Member ✭✭
    edited April 2019
    Check that you have the Amp plugged into the correct RCA on the back of the 6300.  Very easy error to make.  73s Jim K4JAF
  • Steve N4LQ
    Steve N4LQ Member ✭✭
    edited April 2019
    Did you reboot the 6300?
  • Andreas Junge
    Andreas Junge Member ✭✭
    edited December 2016
    It worked with the previous version. I have not touched the cable. 
  • Andreas Junge
    Andreas Junge Member ✭✭
    edited December 2016
    Yes. After the installation of 1.3. I also turned it off a few times when not using the radio. Maybe I'll try to unplug the power cable. 
  • Steve N4LQ
    Steve N4LQ Member ✭✭
    edited September 2015
    Are you otherwise transmitting cw ok? Had to ask.

  • Andreas Junge
    Andreas Junge Member ✭✭
    edited April 2019
    Yes. 
  • Andreas Junge
    Andreas Junge Member ✭✭
    edited April 2019
    OK - I pulled the power all the way. Now it's keying ...

    Thanks for all the input. 

    73, Andreas, N6NU

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.