Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

My 6400M cutting out on tx with amp connected

jim
jim Member ✭
in FLEX-6000 Signature Series
Hi folks, I have a 6400M running to a resonant dipole about 40' up, powering through an ACOM 1500 Linear amp and a Palstar HF-Auto tuner. This is a new issue. Radio runs fine at 100W without the amp. Once I connect amp 6400m shuts down. I've checked power from the DM-330MV Alinco supply and no issues, I've changed out amps (tried both my Al-80B's- no luck- still shuts down), I've checked all patch cables. SWR is showing 1.02 to 1.05 at tuner. running version 4.0.1 on flex. I also have another 6400M and same issue. (runs fine at 100W but shuts down once amp is keyed). I have ferrites on most cables. Also have an MFJ 915 1:1 Current Balun on feed line to antenna.

Can't figure it out. Any ideas or suggestions?

Thanks
Tagged:

Answers

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories