Playback Audio volume

John R

When I record CQ CQ for a xmit loop it plays back too loud when in transmit.
Not too loud actual Xmit but the playback audio is way loud and I'd like to turn it lower.

John R

red button on the Band/Mode/Filter page by touching the Frequency area of the Screen.
Quick Record

Mike-VA3MW

The Quick record was designed to record received audio and play it back to someone who may be adjusting their microphone. It was not really intended to record your transmission to us as a CQ voice keyer.

This might be a bug, but I doubt it was ever reported. You will need to open a support ticket to pursue further.

73

Mike-VA3MW

You can control the Transmit audio level in DAX. This will not affect your MIC audio, only audio played from your computer including Digital modes.

John R

Thanks for the Reply Mike.
Not sure how to apply it though.
Flex 6400M, can't find that view!
No computer involved.
HW version 3.3.33.10471

Mike-VA3MW

Where is your CQ message being generated and what input are you using?

John R

TNX Mike I think you've hit the nail on the head!
I have been using it in this way ( as a voice keyer) for sometime.
Is there another way?
No outside computer involved.

Mike-VA3MW

You might want to have a look at the MFJ-434 voice keyer.

There are also a number of DIY kits.

73

John R

MFJ?? Realy

tnx flex

Mike-VA3MW

There are many others that you may find by searching. The I used to use by Idiom Press is not longer available.

John R

Figured it out Mike.

Touch menu

Touch Audio

Mute or adjust Master Audio-preset