Relating to Slicemaster

Ezt3Tfggle

I've been using an m6700 with slicemaster for CW decode. Suddenly I now find CW Skimmer won't load and I get the error message "Slice is not associated with DAXIQ channel. Slice='A'. I'm pretty certain its something I've done but I don't know what? Help, please.

**** GW4BCF

Ezt3Tfggle

Hi Mike. I've struck lucky, by setting the slice dax to channel 1 then selecting the 1st sample rate, I now have a working cw skimmer. Without your input I'd have been well and truly flummoxed. You lit the lamp that guided me home!


73's ****, Gw4bcf

Mike-VA3MW

Do you have DAX IQ associated to a Slice?

and

Ezt3Tfggle

Hi Mike.
I have channel 1 selected in DAX but in IQ Streams I only see 'No Panadapter'.
****

Ezt3Tfggle

Hi
I now have another problem. The panadapter screen is visible but when tuning the m6700 and although the panadapter in the top righthand window shows the same frequency as the m6700, the cw signal is not visible. Help please.

Mike-VA3MW

@Ezt3Tfggle

M6700? Do you mean a 6600M?

Can you share a picture of what you are seeing please.

Ezt3Tfggle

sorry, its a Flex 6700.
Many years ago I recall seeing in one of my radio instruction manuals a few lines placed within a black boarded text box which read the following: If all else fails read the instruction manual!
In writing this short message I am in no way impuning you or your knowledge. What I am doing is criticizing my own stupidity for not referring to the on-line manual entitled:
NN4ZZ CwSkimmer and SDR-Bridge setup - A quick start guide.
I have now done so and found the answer to my question on pages 28-29.
Thanks again for taking the time out to assist me.
73
Richard