VARA HF 4.0.6 With Winlink 1.5.33 SETTINGS

Ken Golubski

Here is the audio tab:

Ken Golubski

WSJT-X is now working. I didn't realize I had to create a PTT port. I'll try the same now with Vara

Ken Golubski

No joy..... I can only "Test" transmit in the setup for vara......If I use a PTT port there, it will not test. :(

Ted VE3TRQ

That all looks good. WSJT-X transmits? I will need to look at my VARA config - as it is on Windows under parallels (I use a Mac), i just don’t use it too often, but it does work just fine with my 6600M.

Ken Golubski

Yes, WSJT-X is working fine now that I assign a PTT port for RTS part. Tried the same thing with Vara and it won't even test for PTT.

Thanks

Ted VE3TRQ

Here are my settings for VARA and WinLink Express, Ken - hopefully the screenshots work out OK.

First the WinLink VARA HF "Radio" settings (complete with SSDR CAT window):

Then the VARA HF "Soundcard" settings (complete with SSDR DAX window):

Ken Golubski

All settings in the Flex look correct, however, Vara HF P2P Settings box you show is not even similar to what I see in WinLink Express or varac

Thanks

Ken Golubski

More info.

When running winlink express, it will connect to the TNC then time out:

Ken Golubski

YES !!!!

I removed all the TCP ports and it started working. However, the connection window keeps closing, reconnecting to the TNC, everything looks good for a minute, the it closes the window again and start over.

So, I'll just keep playing with it. I really appreciate the time you took to help.

73's

Ken - W4CCZ

Ken Golubski

Just wanted to leave one last comment to say all is working fine now and thank you for the help.

Ken - W4CCZ

Ted VE3TRQ

Glad you got it working, Ken. Not sure why the settings windows were different :-( I tend to always have the latest versions installed. But then I use Windows rarely, only when using WinLink for communications exercises with Club members.

Ted

Trying to use VARA and Winlink with a Flex 3000. Is this possible? So far I have it "working" in that it can initiate a session, and I hear the other station responding with good signal level, but no connect. Then it times out. Are there some settings in PSDR or VARA that I need to tweak?

Ted VE3TRQ

Ted, you at the mercy of latency. The connection sequence requires a very quick tx/rx turnaround. Until very recently (after Flex did some work on reducing digital signal latency) you couldn’t get two Flex radios (6000’s) connecting. You need to do everything you can to reduce delays.

Of course you are using a 3000 with PSDR, so things are different, but the need for low latency does not change.