Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Best Of
-
Re: Maximum Power for TGXL
Hi Dave, Thanks for the advice as always. Even though I'd already done all of that (including using AG v4.1.7) following advice you gave me previously, I did factory resets on both the TGXL and …1 -
Re: Tuner Bypass SO2R
I can't explain what happened to make my TGXL bypass feature STOP working but I just did factory resets (again) of both my AG and TGXL running v4.1.7 and v1.2.11 respectively for other reasons a…2 -
Re: v3.6.8 Noise Blanker.. And it still doesn't work..
Yes, it’s true. Here’s a video I made that shows the problem. I borrowed my friend’s 6500 and ran it side by side with my 6600. Both radios are using the same antenna via a coax switch. The 6500 is o…1 -
Re: LAN question
You can run an Ethernet cable from your router LAN port to the switch then plug all the Flex and Genius equipment into the switch. Plug your PC into the switch and disable the PC WiFi, then reboot ev…1 -
Re: Flex 6600 Selected Antenna Indicator
Hi Alex, you can use an external relay board (e.g. Denkovi) to switch on certain conditions. If RX Antenna, RX A or B is selected + frequency range or band set relay "active high" or "…1 -
Re: With the 6600 in diversity receive mode, does the RIT change the frequency of both VFOs?
When in Diversity on a 6600 or a 6700, you can use RIT or XIT. RIT will move the Receivers in parallel and not split them. You can see here on the Maestro with RIT on, the Transmitter remains on the …1 -
Re: WKFlex - CW remote with SmartSDR and Winkeyer
Hi Alfredo, I replied in private already. WKFlex works only for paddles (Iambic and not Iambic). It doesn't work for Straight Key and for bugs.1 -
Re: Maestro C
I ordered mine directly from Moses.1 -
Re: Maestro C
I have been waiting 3years and 3months1 -
Re: EFHW and TGXL
This was great, Mike. Perfect for a newbie like me. 73 Jason KD9ZHF1
