Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
Best Of
-
Re: Yaesu FTDX3000, Power Genius and TX Delay - How ?
this would work. You have to use a sequencer to first key the amplifier and then the radio.1 -
Re: Need Help With SmartLink on a ATT Fiber Router
Hi, There was a previous thread last year about this, but I was not able to post images at that time. Looks like I can do that now so will post some pics with the description of each step. 1) Connect…1 -
Re: How do I set up RTTY on my Mac and 6600M?
Here us my setup fro FLDIGI with my 6600M here i have multi version of fldigi...i as i test news ones along the way eventually i remove old one hope this gets you started using fldigi... i have an ap…2 -
Re: Maestro works OK remotely, SSDR not so much
We got to the bottom of it. The rancher replaced a poorly performing bridge from the router in the house to the switch in the shop where the radio is. That got rid of just about all of the stuttering…1 -
Re: Official Position on Adaptive Predistortion
Dave, please let me answer Rob's accusations... Rob, 1) You accuse me of being a "fan boy" of Anan, but I'm not. I'm just a proponent of APD. So is John K3MA, per his October…1 -
Re: Official Position on Adaptive Predistortion
Rob, 1) The waveform in the screenshots is a snapshot of the RF output of my AL-80B as captured by and displayed in Thetis. That is the exact same waveform you'd see if you piped the same signal…1 -
Re: Maestro C
If only it was that easy. Well I found out by closely reading the Specs that the MIC Jack is NOT a 1/8" TRS like the 6400M or 6600M but a 1/8" TRRS Headset Phone wiring. It is a Balanced MI…1 -
Re: Porting the FlexVSP COM driver to Win 11 ARM
Thanks for asking this. I have this same question. Thanks, Jason KD9ZHF2 -
Re: Mic Audio Just stop working
You need to be sure that you have PC selected and that DAX is off. To use a mic plugged into the computer, you need to set it as the default recording device.1 -
Re: FLEX-6700 for sale
Flex-6700 is sold pending successful transfer of funds.1
