OK I give.... No RF output.

  • 1
  • Problem
  • Updated 2 years ago
No RF output 20 meters ssb. Followed setup, even the "click on this icon left bottom corner" press microphone button, while watching the connected Byrd RF meter. No output. Clicked on tune button, I get RF output on watt meter. Radio just came back from factory where it passed was tests. What have I missed in software setup?????
Tried from Maestro, same result.
Photo of John Kennon

John Kennon

  • 1 Post
  • 0 Reply Likes
  • sad, don't know where to look

Posted 2 years ago

  • 1
Photo of ka7gzr


  • 218 Posts
  • 36 Reply Likes

You will get no output without speaking. Tune injects audio so you can "tune" the radio. Try speaking when in SSB mode.


Photo of Tim - G7GFW / F4VQP

Tim - G7GFW / F4VQP

  • 170 Posts
  • 73 Reply Likes
Try it on CW or TUNE - should see something then.
Photo of Dudley - WA5QPZ

Dudley - WA5QPZ

  • 212 Posts
  • 45 Reply Likes
Be sure to speak into the mic and raise the mic gain keeping the voice peaks just under "0" dbm in the Level meter.
Photo of Cal Spreitzer

Cal Spreitzer

  • 448 Posts
  • 113 Reply Likes
Check your mic input selection and ensure you have the correct mic input.