N1MM+ - SO2R - Transmit Focus using Foot Switch?

  • 1
  • Question
  • Updated 2 years ago
  • Answered
  • (Edited)

I'm using Field Day as a test bed to get myself familiar with N1MM+ and SO2R operations.

Currently (while in SSB) if I change the focus in N1MM from one log entry field (slice A) to another log entry field (slice B) then hit any F-key the radio transmits using the correct slice.

However, if I change log entry focus then use my foot switch and not an F-key the transmit focus stay's in the previous slice.

The same issue occurs when I'm in CW.  If I change log entry focus and use my Key the TX focus on the Maestro stay's with the previous slice.  If I use an F-Key the TX focus changes to the correct slice and transmits the message.

Is there a setting somewhere that will have the TX focus on the Maestro (or Smart SDR) following changes in the log entry focus of N1MM+?


Thanks in advance.

Rich - N5ZC

Photo of Rich - N5ZC

Rich - N5ZC

  • 173 Posts
  • 19 Reply Likes

Posted 2 years ago

  • 1
Photo of K6OZY

K6OZY, Elmer

  • 532 Posts
  • 197 Reply Likes
Official Response
You can also press control+left or right arrow to switch between radios.