Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Smartlink Setup help

Options
Raul Pla
Raul Pla Member ✭✭
edited December 2025 in Remote Operation (SmartLink)

Is there a step by step instruction set somewhere for SmartLink?. I want to use Maestro at my work QTH, 6600 is at home.. Later I will set up an iPad.

I see the SETUP Smartlink buttons and tried it but nothing works.

I have not found the right info on Youtube.

Tagged:

Answers

  • Raul Pla
    Raul Pla Member ✭✭
    Options

    Follow up. I tried the setupo smart link button, disconencted radio….shows I am registered. The test button shows red.

    I did the steps on the Maestro whiole on 4.01 version before, and it was the same red test. So I hope finding the instructions will solve it.

    network settings are automatic. The Maestro was off.

    Multiflex is enabled….

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited December 2025
    Options

    Paul

    Did you follow Chapter 9 of the SmartSDR manual? It is well laid out there and no sense retyping it.

    https://www.flexradio.com/documentation/smartsdr-software-user-guide-pdf/?srsltid=AfmBOoqqI08YAUoQLaJQD8ri2E9GE2RO_MfTpornvgnvNdMUBLHmJDVI
  • Raul Pla
    Raul Pla Member ✭✭
    Options

    Thank you. and I just posted a discussion question on this. I was looking for a separate Smartlink/remote manual. (sorry!)

  • Raul Pla
    Raul Pla Member ✭✭
    Options

    Mike, I think I passed by that manual many times because it is dated 2019. A lot of the YT videos are also 2017-2020, so IM worried about spending time on old material. Then finding the better one and learning it again.

    Thanks again for the reply.

  • Raul Pla
    Raul Pla Member ✭✭
    Options

    Ive spent hours now. changed settings on the router but smartlink will not test green. going to consult IT tech

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    Options

    All the videos and manuals are still current even though they are that old.

  • Ken Wells
    Ken Wells Community Manager admin
    Options

    How to Set Up SmartLink – FlexRadio

  • Raul Pla
    Raul Pla Member ✭✭
    Options

    I need help. If everything ethernet I conenct to my router and switch work, this should work but it is not. I logged into the router/AP unit and looked at all the settings. Made sure everything was opened up. No restrictions. I will enter a help request.

    I did go over all the manuals by now.

  • Raul Pla
    Raul Pla Member ✭✭
    Options

    Ken Wells helped me. It was a matter of port forwarding. I just didnt understand needing that because the manuals said if things were set up in the router for UPnP the forwarding would not be needed. However the Smartlink was not happy with that so the forwarding was required. Case resolved.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories