Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?


SmartSDR v4.0.1 and the SmartSDR v4.0.1 Release Notes

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Should I be able to tune in RTTY mode?

Erik Carling EI4KF
Erik Carling EI4KF Member ✭✭✭✭
in SmartSDR for Windows

In all modes except RTTY, going into Tune produces a carrier as expected.

tune.png

However, as I found out in CQ WW RTTY Test this past weekend, in RTTY mode it is not possible to Tune.

no tune.png

There is no output from the radio.

Some versions ago, Tune worked fine in RTTY. Then there was a bug introduced where, although Tune worked, the carrier was +2kHz from the dial frequency. In 3.9.19 there is no Tune at all. Should it be like this?

I did do a radio reset but to no avail.

Erik.

Answers

  • johnn1jm
    johnn1jm Member ✭✭✭

    Do you have DAX on?

  • Erik Carling EI4KF
    Erik Carling EI4KF Member ✭✭✭✭

    Yes John, DAX is on. The issue is not DAX related but mode related. With same settings and working in SSB, CW, DIGU etc there is no Tune in RTTY.

    Erik.

  • Rich M5RIC
    Rich M5RIC Member ✭✭✭

    I get the same on my 6600 Erik.

    Rich

  • Erik Carling EI4KF
    Erik Carling EI4KF Member ✭✭✭✭

    Rich - thank you for confirming.

    Is it a bug or is Tune deliberately suppressed in RTTY? I cannot imagine why it would be and it did not used to be this way.

    Erik

  • johnn1jm
    johnn1jm Member ✭✭✭

    When I click on tune here in rtty mode, I get power out to whatever I set tune power to on my 6600 and 6400 using Mac or Windoze SSDR. I'm on the latest version 3.10.10.

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Tune does work in RTTY mode. If you are not able to, please open a support ticket so we can track it to a root cause.

    thanks

  • Erik Carling EI4KF
    Erik Carling EI4KF Member ✭✭✭✭

    I am on 3.9.19 due to the broken IQ stream in 3.10.10 and that could be the reason for no tune if it was fixed recently. So I'll wait for the next version, update and see if it works then.

    Thanks for the feedback.

    Erik.

  • johnn1jm
    johnn1jm Member ✭✭✭

    I participate in a lot of RTTY contests and I don't recall ever having any problems with tune in any version.

  • Erik Carling EI4KF
    Erik Carling EI4KF Member ✭✭✭✭

    But some are, as shown above. So something either is or has been amiss somewhere.

  • Ron Koenig
    Ron Koenig Member ✭✭✭

    It was given SMART-11364 when I reported it months ago.

  • g4ivv
    g4ivv Member ✭✭

    Erik,

    I also have the no power with TUNE in RTTY mode, 8600 running 3.9.19. Which is a bit annoying as have to stop SDC in order to change mode to something else, tune antenna and then restart SDC contest.

    Hope this is will be fixed in an upcoming release.

    73, Jonathan G4IVV

  • Erik Carling EI4KF
    Erik Carling EI4KF Member ✭✭✭✭

    It is very annoying. It plagued me in CQ WW and now in JARTS. Reported months ago.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories