Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Using WKFlex

JohnK2CIB
JohnK2CIB Member ✭✭
in Remote Operation (SmartLink)

Hi Max. I am missing something. I have been using my WinKeyer USB with my remote Flex successfully for many years, but have only a feeble piezo transducer in the WinKeyer for sidetone. I have brought out the leads into a small amp/speaker and that works, but isn't that what your program is supposed to do? I ran WKFlex and it inserts properly into the keying stream but what am I gaining by using WKFlex? I thought it would produce sidetone.

John, K2CIB

Answers

  • N5NHJ
    N5NHJ Member ✭✭✭

    Hi John,

    The goals of WKFlex are 1) using a paddle to send CW from a remote radio and 2) have some sort of no-delayed sidetone at the operating site.

    The sidetone is generated by the device (WKUSB, K3NG, etc.. WKUSB-AF is perfect for this) not by the software. WKFlex creates a tunnelling between your device and the virtual winkeyer embedded in SmartSDR.

    I'm not aware of any althernative method to use a paddle (and generate a local sidetone) other than WKFlex, or a pair of Remoterig boxes, or the RemoteKeyer software.

    If you have discovered something new, plaease share it with the community.

    73, Max

  • ea5wa
    ea5wa Member ✭✭
    Is my first day trying to use WKFlex. My Flex 6600 is transmiting my CW created by WKFlex, but I don't have any sidetone.

    What could be wrong?

    73 de EA5WA Juan Carlos
  • N5NHJ
    N5NHJ Member ✭✭✭

    The sidetone is generated by your local Winkeyer. You need to check the Winkeywr config.

  • N5NHJ
    N5NHJ Member ✭✭✭

    Why do not switch to MorCoNI?

  • ea5wa
    ea5wa Member ✭✭

    I would like to have the sidetone in my headphones to not bother my family.

    One of the reasons I started in CW was because it allowed me to do radio at night without disturbing my family.

    I can not understand why I can not do it remotelly with a Flex Radio

    73 de EA5WA Juan Carlos

  • JasonSt
    JasonSt Member ✭✭

    Perhaps mix the output of the radio and the Winkeyer into a single line?

    73 de KD9ZHF Jason

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories