Skip to content
  • Register
    • Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
    Need the latest SmartSDR, Power Genius, Tuner Genius and Antenna Genius Software?

    SmartSDR v3.8.23 and the SmartSDR v3.8.23 Release Notes
    SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes
    Power Genius XL Utility v3.8.9 and the Power Genius XL Release Notes v3.8.9
    Tuner Genius XL Utility v1.2.11 and the Tuner Genius XL Release Notes v1.2.11
    Antenna Genius Utility v4.1.8
    If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
    Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

    Customize RX filters (right click & configure)

    2»

    Comments

    • Member ✭✭
      edited February 2018
      I also would like programmable filter widths.  As far as toggling through all filter widths, you can mark your favorites and then toggling only sees these so maybe 3 or 4 (your choice) instead of 8.  
    • Member ✭✭✭
      edited February 2018
      Well I have a red face. LOL

      Not only is that feature available, its exactly what I photo shopped.

      OK, I better get the manual out again :)

      Sorry for the waste of bandwidth.  And yes, I still want programmable filters.

      Rich

    • Member ✭✭
      edited July 2018

      At this point I have giving up on waiting for new features in SSDR I just take them as they come. At the current pace that SSDR is being developed it may be 4 to 8 years before SSDR has a feature set including so many of these basic features.

      Now don't get me wrong what FRS has achieved with SDR radio is nothing less than remarkable and what SSDR and the 6000 series does today it does very well. I like many of you know that the 6000 platform are the finest radios available today.

      My hope now is after the dust settles with the launch of the new radios and amplifier that FRS puts a lot more resources into SSDR development.

    • Member ✭✭✭
      edited February 2018
      I did find this in the manual but it was not easy. I have an edit suggestion for the manual.

      I could only find a single reference on how to custom set the filters that are selectable via the knob under "HOW TO OPERATE SINGLE SIDEBAND MODE (SSB)" and did not see it under CW or any other mode.

      It seems the most appropriate place to have this info (which is where I looked) is here.

      Rich
      image
    • Administrator, FlexRadio Employee admin
      edited February 2018
      I have forwarded this to our documentation team.  Thanks.
    • Administrator, FlexRadio Employee admin
      edited February 2018
      It will.
    • Member ✭✭✭
      edited February 2018
      I agree with all this John. I guess there are pros and cons to dealing with small company's.

      I personally think Flex has the best thing going for HF radio. But, I doubt anyone will argue that some updates don't come as fast as we would like.

      That said, I sure hope we don't lose the small company feel and support that we currently have if they grow large enough to handle the above mentioned updates.

      It's often hard to have both. I am still bitter over large company treatment from Yaesu on a FT-980 in the mid 80s and have never bought another of their products since.

      Rich
    • Member
      edited February 2018
      My feeling about Kenwood match yours about Yaesu, but I reserve real hatred for Microsoft.
    • Member ✭✭
      edited September 2018
      Will this feature ever be added to SSDR?  Surely we have waited long enough.  Flex needs to concentrate more on Basic Radio functions!
    • Member ✭✭
      edited October 2018
      Would like this feature .. add me to the list of supporters.
    • Member ✭✭
      edited February 2019
      I would like this feature also.  
    • Member ✭✭
      edited May 2020

      me too. One of the reasons I downgraded to 2 x Flex 3000 was to get this important feature back.
    • Member ✭✭✭
      edited September 2018
      Added a vote to this idea..  dont know how it was missed 4 years ago!
    • Member ✭✭
      edited September 2018

      Add me to this list also. I miss the ability to customize filters like I once could on my F5000.

      73, Mark
    • Member ✭✭
      edited September 2018
      For such a popular addition to the Flex software, why is it taking so long (4 years)?
      Surely Flex can update software faster than this.......

    • Member
      edited September 2018
      Definitely a feature I'd like to see... soon!
    • Member ✭✭

      I was very surprised to find that the filters cannot be customized. It has been a standard feature in PowerSDR and Thetis for ever.

      Why is there zero offset on the low frequency side of DIGU but -710 Hz on DIGL? I don't know of any reason that they are not the same.

      Also I don't like my SSB filters starting at 100 Hz. I would prefer them to be at 150 Hz.

    • Member ✭✭

      I fixed the different offset on DIGL by changing the DIGL offset on the slice receiver slice from 2210 to 1500. It might have been set at 2210 for RTTY use??

    Leave a Comment

    Welcome!

    It looks like you're new here. Sign in or register to get started.
    Sign In
    Register
    New Idea

    Quick Links

    Categories