Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Question about RX inputs on 6600

KI5RLR
KI5RLR Member ✭✭
in FLEX-6000 Signature Series

When using a receive-only antenna located very close to a transmit antenna, should an RF limiter be placed in the RX antenna feedline to prevent damage to the radio? Or do the RX inputs have built in protection?

73

Clif

Answers

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    That is always a good idea. They are protected to vary large signals (detail in the hardware manual).

    If using a Beverage, then yes as they are good a picking up large ground static so you do need some way to discharge that.

    A simple 'hack' is to add an NE62 Neon bulb across the line, if you can find one.

  • KI5RLR
    KI5RLR Member ✭✭

    Thanks Mike. I will have to look into the Neon bulb method. I will probably use something off the shelf like the DX Engineering 'Receiver Guard'.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories