Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Antenna Genius 8x2 - Lost connection to network

Options
Member ✭✭
in Antenna Genius

My AG lost connection to my local area network after a reboot. I have tried resetting with DIP #7 and also tried loading the bootloader with DIP #8.

The ethernet port LEDs flash on and off, over and over. At the switch there is no lights indicating a connection of any sort. I have tried different cables, switches, etc.

Has anyone had this issue and resolved it?

Thanks

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Have you tried a different cable or network switch?

    It sounds like your Router is not assigning it an IP address. Can you tell by looking at the DHCP page in your router?

  • Member ✭✭

    It has worked for nearly a year. It has an IP assigned to it by my routers DHCP server.

  • Member ✭✭✭

    If you've swapped the cable and router and that's made no difference nor has resetting it, probably time to log a helpdesk ticket with 4O3A.


    73


    Rich

  • Member ✭✭
    https://community.flexradio.com/discussion/comment/20609501#Comment_20609501

    I got one of my old routers and was able to connect to it no problem. I am guessing the problem is with my current network, perhaps a recent firmware update changed something drastically enough that it will not let the AG connect. I am using Ubiquiti network gear for my station... and they did roll out some updates about the same time as this problem occurred, but it was not like the AG dropped as soon as I updated the firmware... weird. Also, not only will my Ubiquiti gear not connect to it, the ethernet port on the Ubiquiti switches, router, etc do not even light up.


    I tried setting a static IP in the AG, but that did not help. Any suggestions?

  • Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    I have 1 switch that 4O3A devices do not play well with and I think it has to do with the AutoNegotiation, but I am guessing at this point.

  • Member ✭✭
    https://community.flexradio.com/discussion/comment/20609534#Comment_20609534

    After performing numerous hard resets on the AG it popped back up. Not sure what the problem was.

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories