Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

FLEX 6700 RELAYS

hawkeye78299
hawkeye78299 Member ✭✭
in FLEX-6000 Signature Series
Has anyone changed out the relays for pin diodes?

Comments

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    It isn't that simple as you would have to redesign the RF boards.

    One of the concerns that FlexRadio didn't use Pin diodes was that Pin diodes can degrade IMD performance.

  • hawkeye78299
    hawkeye78299 Member ✭✭

    Thanks for your reply. Then, is there a way to bypass the relays. I run ALE 24/7. Your interest is appreciated.

    John S.

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    I don't think there is any need to bypass the relays. We have many many users running ALE without issue.

  • hawkeye78299
    hawkeye78299 Member ✭✭

    Are they running 24/7/365?

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited November 2023

    I would assume some are, but I have no factual data to share with you.

  • hawkeye78299
    hawkeye78299 Member ✭✭

    Mike

    Thank you for your assistance. You can send the data to my email address.

    John S.

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    oppsss... my bad. somehow I dropped 1 word.


    It should say that I have no factual data.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories