Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?


SmartSDR v4.0.1 and the SmartSDR v4.0.1 Release Notes

SmartSDR v3.10.15 and the SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

WSJT no longer works after 3.3.33

AH0U
AH0U Member ✭✭
edited January 2023 in Third-Party Software

Loaded the new version 3.3.33 and that went well but now if I transmit in FT8 get a very broad and strange signal... using WSJT-X version 2.5.4 and SliceMaster.. this has worked well for a very long tine now it does not...I can click on TUNE in SSDR and it shows fine but tune in WSJT-X and it goes nuts... see screen shot attached.... Any ideas??? It does the same thing with JTDZ..I have tried a Factory reset and deleting and reinstalling software... The signal seems to "pulse" every second or so.. goes normal then this ... Ideas???



'

wave.png


Comments

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Please post a picture including the controls at the right, especially the LEVEL meter.

    Since you have reset everything, that isn't part of the problem. In order to provide more insite, I need to see more of your configuration.

    Anytime you have a transmit issue with any digital mode you need to review the audio levels first. That is the part that is missing from your picture.

    73

  • AH0U
    AH0U Member ✭✭

    My mail wont allow me to send a video but the wave from pulses so the one in this screen shot is different but you can see the whole setup... over driving was my first thought but that i not the case.

    wave2.png


  • AH0U
    AH0U Member ✭✭

    If you would like to see, I can Teamview so you get the whole experience

  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin

    Please open a support ticket. This will require some more investigation.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories