SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
6400 S meter never below S3
K5BLS
Comments
-
Do adjust AGC-T. Then you could see this Flex video: Understanding FlexRadio’s S-meter readings – FlexRadio
You will get a clear understanding of what you are seeing.
0 -
Thanks for the reply, Yes Adjusted the AGC-T and even with a dummy load and bandwidth zoomed in it will not show less than a s3-s5 and states better than -95dbm at the receiver. Pretty sure a dummy load has no RF coming from it so I'm perplexed how I'm supposed to trust this at all. Either antenna port displays the same results.0
-
Take a look at this thread and the video. Tim does a great job of explaining it.
https://community.flexradio.com/discussion/8009837/tim-explains-s-meters
0 -
So K5BLS, have you gone to CW on a Dummy load with the mode set to CW and the filter set to say 50 you're still showing S3-S5
mine here is about 0 to .25 DB on the S meter for a reference.
0 -
Your S Meter reading is related to your receive bandwidth.
If you want to see your true noise floor, set your RX bandwidth to 50Hz.
1 -
Because the flex S meter indicates the signal strength at the antenna terminals, before the preamp, the reading is not affected by the amount of preamp boost or attenuator cut.
0
Leave a Comment
Categories
- All Categories
- 389 Community Topics
- 2.2K New Ideas
- 658 The Flea Market
- 8.4K Software
- 157 SmartSDR+
- 6.5K SmartSDR for Windows
- 186 SmartSDR for Maestro and M models
- 439 SmartSDR for Mac
- 275 SmartSDR for iOS
- 265 SmartSDR CAT
- 204 DAX
- 386 SmartSDR API
- 9.4K Radios and Accessories
- 53 Aurora
- 297 FLEX-8000 Signature Series
- 7.2K FLEX-6000 Signature Series
- 971 Maestro
- 58 FlexControl
- 866 FLEX Series (Legacy) Radios
- 945 Genius Products
- 472 Power Genius XL Amplifier
- 347 Tuner Genius XL
- 126 Antenna Genius
- 307 Shack Infrastructure
- 215 Networking
- 468 Remote Operation (SmartLink)
- 142 Contesting
- 811 Peripherals & Station Integration
- 144 Amateur Radio Interests
- 1.1K Third-Party Software




