Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Remote 220-240VAC Switch

Mike-VA3MWMike-VA3MW FlexRadio Employee, Community Manager admin

I have a customer looking for a 220-240VAC web switch in North America.

I know some of you who are more confident working with 240V have manufactured your own, however I can't seem to find a remote off the shelf switch.

I suspect these are more common in the EU since the higher voltage is standard.

Is there a North American 'off the shelf' certified web switch available that anyone has located?

Mike va3mw

Best Answer

Answers

  • AlanAlan Member ✭✭✭

    Hi Mike

    Digital Loggers, up to 240 VAC, 15 amp per socket.


    Alan WA9WUD

  • Mike-VA3MWMike-VA3MW FlexRadio Employee, Community Manager admin

    Hi Alan

    I had a look at that. For others that may wish to use it, if you plug it into a 220 circuit, you can only use 220 devices for switching on the outputs. It will not support both 120 and 220 at the same time.

    But, if you are creative, you can make this work just fine.

    Mike

  • John WA7UARJohn WA7UAR Member ✭✭

    I was looking hard for a similar product and found this unit: the "RPCM AC ATS 16A" smart PDU. Link below:

    Although it is an innovative product, and it is available from distributors around the world, it is apparently only shipped internationally from Russia and customs and shipping costs seemed excessive.

    I have a cost that was quoted to me that I can share if contacted privately -- but the digital-logger product in this thread appears to be "good enough" and I am seriously considering it (I wish it supported more than 15 amp.)

  • AlanAlan Member ✭✭✭


  • Rene PA3ECLRene PA3ECL Member ✭✭
    The Sonoff switches will also be available in a US version (Alieexpress). Little tinkering. Works with the ewlink app and simple operation..
  • John WA7UARJohn WA7UAR Member ✭✭

    @Rene PA3ECL please provide a direct link to the Sonoff product here when it becomes available. Thanks.

  • Rene PA3ECLRene PA3ECL Member ✭✭
    Take a look here John. Change language and currency and your done. These wifi switches can handle max 10A.

    https://nl.aliexpress.com/item/4000106847424.html?spm=a2g0o.productlist.0.0.17b151e058yGs5&algo_pvid=75ab2682-3b5c-44d7-8f21-29601929460a&algo_expid=75ab2682-3b5c-44d7-8f21-29601929460a-21&btsid=2100bdca16041722213743226e0f65&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
  • John WA7UARJohn WA7UAR Member ✭✭

    Thanks @Rene PA3ECL -- while I appreciate the link, I am most interested in a 220-240 V AC Switch that will be able to handle the draw of the PGXL amp (which is rated at 15 amps). If the wifi switches you reference can only handle a maximum of 10A then they are not robust enough for the PGXL. The two other product links mentioned previously in this thread seem better suited for what I am looking for. If anyone has other suggestions for any off-the-shelf product then please do let us know. Best regards to you all.

  • Mack W4AXMack W4AX Company Adviser ✭✭

    John,

    I know you said you'd like an off the shelf product but you or an electrician can make one in about an hour. Here the one I made for my PGXL. Buy this contractor: https://www.amazon.com/gp/product/B004ZRWG9C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

    Wire the 240 VAC through the contactor to a suitable 240 VAC outlet. Plug the PGXL into the outlet. Power the relay on the contactor using a WiFi or wired outlet (doesn't require high current). You're in business. Place the contactor in a NEMA box available at the big box store.


  • John WA7UARJohn WA7UAR Member ✭✭

    Thank you @Mack W4AX ! This looks straight forward enough that I might actually try to do it myself! I very much appreciate the picture too.

  • Mack W4AXMack W4AX Company Adviser ✭✭

    John,

    let me know If you have questions.


    mack

    W4AX

  • Tim VE6SHTim VE6SH Member ✭✭

    Mack

    Thank you for the link. Exactly what I was looking for. The Amazon.ca link is https://www.amazon.ca/Packard-C340B-Pole-Contactor-Volt/dp/B004ZRWG9C/ref=sr_1_1?dchild=1&keywords=Packard+C340B+3+Pole+40+Amp+Contactor+120+Volt+Coil+Contactor&qid=1604341782&sr=8-1 (although Amazon.com will ship it to Canada with no duty).

    Tim VE6SH

  • Mike-VA3MWMike-VA3MW FlexRadio Employee, Community Manager admin

    @Tim VE6SH

    Wow, that will do the job.

    I am using a DPST Potter and Brumfield 12Vdc relay good for about 15amps on each pole. I think it cost me $12. I have it connected to a socket.

    It looks like this.

    Mike va3mw




  • Tim VE6SHTim VE6SH Member ✭✭

    @Mike-VA3MW Yes, that would work as well. The other unit looks like something even I could wire together :-)

    73

    Tim VE6SH

  • KF4HRKF4HR Member ✭✭

    I did something very similar to Mack's arrangement but added a Surge Suppressor

    to help minimize any contactor spark & surge, and since I use Insteon devices throughout my home which I have linked to my Amazon Echo devices, I added a fused 120vac control line which connects to an Insteon 120vac Power Module. This allows me to turn my PG-XL on or off via Alexa voice commands. Wiring diagram and photo

    attached.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.