Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.
SmartSDR v3.2.39 and the SmartSDR v3.2.39 Release Notes | SmartSDR v2.7.6 and the SmartSDR v2.7.6 Release Notes
SmartSDR v1.12.1 and the SmartSDR v1.12.1 Release Notes | Power Genius XL Release Notes v3.6.21
Power Genius XL Utility v3.6.21 | Tuner Genius XL Utility v1.1.1
Flex 6400 problems with Elecraft KAT500
I have been using my Flex 6400 with an Elecraft KAT500 tuner and KPA500 amp. I have all the cables connected as per the KAT500 manual. I have been using GAP 20 Meter Mono and a Zero-Five 43 Ft. vertical Everything has worked fine for about 6 months but recently I get a Fault on the tuner and sometimes the amp also on certain bands even with a dummy load or on the GAP on 10 or 17 antenna with only a 2.3 SWR on some bands. I even converted my Zero-Five to a 33 Ft 40 meter vertical and still have a problem. When it happens it even has a Fault when in Bypass. When I get a fault it's after seeing low SWR on the meter in my Maestro on Tune but then goes high on transmit. I have checked or replaced all my coax cables and don't believe their is problem with my setup.
I have been in contact with Elecraft support but not getting any answers yet. Apparently due to stay-at-home orders in CA their repair activity is limited.
I did notice after a Fault, that with the USB able from the KAT500 to the Flex the high SWR problem is gone in Bypass. I am wondering if the communication between the Flex and tuner is giving the tuner a frequency change on transmit. I have not had any RF in the shack issues and everything is well grounded and bonded as per the N0AX book.
Has anyone else using this setup experienced anything like this? Right now I am very disappointed with Elecraft and wonder if I should have saved money and got an LDG AT-100Pro II.
Any comments appreciated.
Leave a Comment
- 17.1K All Categories
- 99 Community Topics
- 2K New Ideas
- 211 The Flea Market
- 5.8K Software
- 5.1K SmartSDR for Windows
- 73 SmartSDR for Maestro and M models
- 153 SmartSDR for Mac
- 166 SmartSDR for iOS
- 166 SmartSDR CAT
- 88 DAX
- 298 SmartSDR API
- 7.5K Radios and Accessories
- 6.1K FLEX-6000 Signature Series
- 595 Maestro
- 20 FlexControl
- 756 FLEX Series (Legacy) Radios
- 275 Genius Products
- 193 Power Genius XL Amplifier
- 77 Tuner Genius XL
- 5 Antenna Genius
- 71 Shack Infrastructure
- 36 Networking
- 139 Remote Operation (SmartLink)
- 67 Contesting
- 208 Peripherals & Station Integration
- 73 Amateur Radio Interests
- 495 Third-Party Software