Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Maestro Waterfall missing TX label Slice A B

Options
Member ✭✭
edited October 2020 in SmartSDR for Maestro and M models
Missing activ TX Label under slice A B on the waterfall.

I have two options for observing the display. either I look at the top left / right scale with frequency display and active TX or I look at the waterfall, which I think most people do. 

Big disadvantage, you don't see the active TX there, so you have to look back again at the top of the scale whether A or B is active. Sorry that I can't tell on the waterfall whether A or B is active, which makes me sometimes  confuse..


Well, i have two eyes but i want to look straight. It would be desirable if the active TX icon were placed under the A or B slice. 

Can you do that?

Tagged:

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Member ✭✭
    edited June 2020
    Can you take a picture please....
    Joe
  • Member ✭✭
    edited June 2020

  • Administrator, FlexRadio Employee admin
    edited June 2020
    The Maestro and M models radios do not clutter the panafall display with a TX indicator.  The TX indicator is what you circled.  This is not something that we would be inclined to so as we want to keep the panafall display as clear as possible.
  • Member ✭✭
    edited June 2020
    Thank you =Hans,,,
  • Member ✭✭
    edited June 2020
    ok, understandable if you do not want to overload the display with additional icons, but maybe it would be helpful to color-code or underline the TX active slice. Any identification would be desirable. Thank you.
  • Member ✭✭

    Hi,

    Another possibility would be to color the background of the TX slice letter in red... HW?

    73! Uwe

    DK3WW

  • Member ✭✭
    edited October 2020

    Maybe I'm not alone, but I have to be very careful not to call on the wrong slice because the TX assignment is missing on the waterfall. That makes me crazy. This can´t happen with the Smart SDR because the assignment is clear there. Sometimes I wish to have the screen separate side bei side, then the waterfall is very narrow but better assigned to the TX than waterfalls one above the other.

    Toffy dj6zm

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories