Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Mouse

Terry L Angle
Terry L Angle Member ✭✭
edited April 2020 in FLEX-6000 Signature Series
I am new to Flex with a 6400M. I have set it up with a monitor with the HDMI. I now want to set up a mouse for the monitor. Having problems finding where in the manual how to setup the USB mouse. Please help

Answers

  • Fred KE4Q
    Fred KE4Q Member ✭✭
    edited February 2020
    You can not control the radio in this configuration and can not set up a mouse via the flex USB in the back of radio. The hdmi out to a monitor only provides a larger display to look at.
  • Andy W3LI
    Andy W3LI Member ✭✭
    edited April 2020
    You need to download SmartSDR to have mouse control and Flex control to function. Then you can play all you want on the monitor.
  • Joseph Coffaro
    Joseph Coffaro Member ✭✭
    edited February 2020
    My system is hooked to pc lan hdmi out to monitor mouse work fine
  • Bill -VA3WTB
    Bill -VA3WTB Member ✭✭✭
    edited February 2020
    The radio is not designed for mouse control, it does not have a mouse driver. the mouse is intended for the client side, not the radio side. Installing SSDR for Windows on a Pc or any like device will give full mouse support.
  • Robby
    Robby Member ✭✭
    edited February 2020
    It is no problem Joseph. Plug a USB mouse into your computer. It will work with SSDR which is part of your radio.

    73,

    -Robby

    HP3SS

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories