Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

V3.1.8.145 and TNF

Options
N4QM
N4QM Member ✭✭
edited June 2020 in FLEX-6000 Signature Series
There was a carrier in the middle of the passband of my 75M schedule frequency this evening so I decided to give the TNF a try to eliminate it.  Nothing happened.  Thinking it might be a radio issue I opened up SmartSDR and tried to eliminate the carrier with the TNF there.  Nothing.  Thinking it might just be too weak of a signal to eliminate, I moved down to the CW band and found a strong station calling CQ, and set a TNF on his frequency.  Still nothing, no matter how wide or narrow the setting, regardless of how deep a notch I set, there was no notch.

Am I the only one experiencing this with the latest version of software?

73, de N4QM

Comments

  • Jim KJ7S
    Jim KJ7S Member ✭✭
    edited January 2020
    Options
    On the bottom left of the screen you will see some items, if you will, among them will be a TNF, if that is greyed out , it is OFF, click once to turn it on. good luck.
  • N4QM
    N4QM Member ✭✭
    edited October 2019
    Options
    On the bottom left of the 6400M display there is a left arrow "DISPLAY" menu popup, nothing resembling what you described.
  • N4QM
    N4QM Member ✭✭
    edited January 2020
    Options
    But your suggestion was still helpful.  I found the setting in the frequency/band touch menu accessed by touching the slice frequency readout.  TNF was turned off.  Thank you.
  • Bob G W1GLV
    Bob G W1GLV Member ✭✭
    edited June 2020
    Options
    Dennis, the TNF will only eliminate the audio from the carrier.
  • N4QM
    N4QM Member ✭✭
    edited October 2019
    Options
    That's all it needs to do
  • Jim KJ7S
    Jim KJ7S Member ✭✭
    edited October 2019
    Options
    Very Good, you did find it hi. I have a 6300 here so the computer monitor may act just a little different from the 6400 displays, but great you did find the operative ...Enjoy!!  '73' tnt  Jim

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories