Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.
6300 and Tokyo High-power
Options
Jean Drolet
Member ✭✭
It’s possible to connect my Tokyo hight-power hl-1.5k direct to flex6300 without DDutil
0
Answers
-
Hello Jean, You will need to set up the amplifier for Kenwood CAT using RS232C. Then you will need to get a FTDI Usb to serial adapter. Plug it in and under the USB cables menu configure this adapter in SmartSDR as a CAT cable. Then you can attach it to your amplifier as you would any kenwood Radio.0
-
It’s possible without computer i use my maestro on remote0
-
Yes. The usb cable connects to the radio. No computer is needed. I didn’t mention it but you also need rf in, antenna and ptt cables.0
-
I have that setup but had to use a Null Modem cable from the USB - RS-232 to the THP amp.0
-
i coonnect this cable but i dont have reaction between flex6300 and hl-1.5kfx
https://www.amazon.ca/gp/product/B00QUZY4R4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
0 -
i order 2 cables ... https://www.amazon.ca/gp/product/B00QUZY4L0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=10
-
i connect my cable ... sdr detect i go to the setting usb and i select kenwood on Tokyo.. but dosent work
0 -
Are you using a Null Modem cable? The THP requires a Null Modem RS-232 cable. I made a simple adapter using a pair of DB-9 connectors back to back.0
-
null modem rs232 to my cable ??
https://www.amazon.ca/gp/product/B00QUZY4L0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=10 -
-
**** it's the correct cable ?0
-
You can buy a Null Modem adapter to go between your cable and the THP amp. Just make sure you get the proper male/female connections. As I said earlier, I made one, but they are readily available on Amazon and other Web sites.0
-
Thank's **** .... all it's ok with null modem adapter...0
-
For all with tokyo Hi-power HL-1.5KFX
cable: https://www.amazon.ca/gp/product/B00QUZY4L0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
and null modem adapter : https://www.amazon.ca/Monoprice-101203-Null-Modem-Mini/dp/B001TIP9AS/ref=sr_1_7?s=electronics&ie...
0 -
Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator adminOptionsI just did this with a customer and we had to turn on AutoReport on SmartSDR USB/Advanced settings.0
Leave a Comment
Categories
- All Categories
- 401 Community Topics
- 2.2K New Ideas
- 689 The Flea Market
- 8.6K Software
- 197 SmartSDR+
- 6.6K SmartSDR for Windows
- 200 SmartSDR for Maestro and M models
- 460 SmartSDR for Mac
- 279 SmartSDR for iOS
- 268 SmartSDR CAT
- 220 DAX
- 395 SmartSDR API
- 9.6K Radios and Accessories
- 110 Aurora
- 348 FLEX-8000 Signature Series
- 7.2K FLEX-6000 Signature Series
- 999 Maestro
- 58 FlexControl
- 872 FLEX Series (Legacy) Radios
- 975 Genius Products
- 482 Power Genius XL Amplifier
- 358 Tuner Genius XL
- 135 Antenna Genius
- 322 Shack Infrastructure
- 227 Networking
- 483 Remote Operation (SmartLink)
- 147 Contesting
- 847 Peripherals & Station Integration
- 147 Amateur Radio Interests
- 1.1K Third-Party Software