Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Flex6 and Acom 2000 and remote

Chris DL5NAM
Chris DL5NAM Member ✭✭✭
edited April 2020 in FLEX-6000 Signature Series
Hello

been asked from a friend - a flexer:

is there a way to use the Acom 2000A for remote operation without any PC at remote side?

He using SSDR-IOS and a F6. Switching Power ON is not the problem but - remote switching from STANDBY to OPERATE after Power ON

Chris

Answers

  • kr4k
    kr4k Member ✭✭
    edited December 2018
    Recommend the RemoteRig RC-1216H, which I use with my Elecraft KPA500. RC-1216H works with the ACOM 200A amplifier. I also use the RIGrunner 4005i to control power to my Flex 6700. They both provide a nice web interface independent of a separate PC.
  • Buford, W4HVW
    Buford, W4HVW Member ✭✭
    edited July 2019
    I use the RC-1216H to control power to station and also rotor control.  
  • Mike-VA3MW
    Mike-VA3MW Administrator, FlexRadio Employee, Community Manager, Super Elmer, Moderator admin
    edited April 2020
    If the amplifier is always in operate, then you can turn TX1 on or off right from a Maestro or SmartSDR.  The, the Amp will not go into TX unless you have the TX line enabled.

    Mike

  • Chris DL5NAM
    Chris DL5NAM Member ✭✭✭
    edited December 2018
    Mike i not know the Amp exactly. Operate/Standby is a switch or a push button?

    The US guy who ask me is a bit over 80 years old and i would help him to have more fun with his F6

    :-)

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories