Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Issues with SmartLink in SmartSDR v2.4.9

WX7Y
WX7Y Member ✭✭✭✭
edited June 2020 in FLEX-6000 Signature Series
Issues with SmartLink in SmartSDR v2.4.9 radio chooser with DAX and CAT not finding the radio, SmartSDR seems fine. 

Comments

  • Jim Gilliam
    Jim Gilliam Member ✭✭
    edited September 2018

    Did you try manually connecting to both the CAT and DAX?
  • Lynwood Wilson
    Lynwood Wilson Member
    edited September 2018
    Strange, v2.4.9 doesn't show up in my 6400M, only in SmartSDR also.

  • Andreas Junge
    Andreas Junge Member ✭✭
    edited April 2019
    You have to login into each program individually: SSDR, SDR-Cat, SDR-DAX 

    Andreas, N6NU
  • WX7Y
    WX7Y Member ✭✭✭✭
    edited June 2020
    something was out of sink, when I connected to each program individually SmartSDR would logout of smartlink and un-register it self and DAX and CAT would show the radios in the chooser then if I reconnected the radio the other 2 would not show up in Radio chooser. 
    I finally got both radio's in sync but had to un-register and log-out ALL three programs  and both radio's with ALL three radio chooser up and re-logged in and on the desk top I only had to resister the Radio's SmartLink on SmartSDR and the others followed suit. 
    I think the trick is to un-register the radio's from SmartLink then do the upgrade then login and re-register smartlink after the Update.

    Thanks for the response's
    73's
    Bret
    WX7Y



  • DH2ID
    DH2ID Member ✭✭✭
    edited September 2018
    The issue here is, that SmartSDR stops working if I have registered SmartLink.
    It just crashes on my Windows 7 notebook, I have to terminate it with my task manager.
    If I unregister, all is fine.
    I'll open a ticket.
    73, Alex - DH2ID
  • Sergey R5AU
    Sergey R5AU Member ✭✭
    edited September 2018
    I have tested new 2.4.9  in SmartLink mode and  with OpenVPN:
    really perfect, even with Latency up to 200ms and more ! i get FT8 QSO's without trouble 

    Win10
    DIGI -> JTDX ->https://www.jtdx.tech/en/
    F6700
    Router - ASUS AC-3200

    KUDOS ! 
  • DH2ID
    DH2ID Member ✭✭✭
    edited September 2018
    Sorry, the issue seems not to be SmartLink, but my batch file!
    I start all programs with a compiled batch file, containing the line:
    "start SmartSDR.exe --serial=XXXX-XXXX-XXXX-XXXX"
    This seems to crash SSDR. I've opened a ticket.

    My workaround:
    1. Start SSDR manually - this works on all PC's and notebooks and OS 7-10
    2. Start all the programs with a compiled batch file:
        MiniDeluxe, JTAlertX with WSJT-X, HRDLog,Stacks and GridTracker
    I will compile more batch files to start other program constellations.

    73, Alex - DH2ID

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories