Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?
SmartSDR v4.1.3 | SmartSDR v4.1.3 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes
The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

60M operation with ver 2.3.9 software

Geoff_W8GNM
Geoff_W8GNM Member ✭✭
edited August 2018 in FLEX-6000 Signature Series
TUNE and MOX functions are not working on all 60m channels using software version 2.3.9 running on Flex 6600M.

Neither MOX or TUNE functions will work on 60m CH-3 (5366.5kHz) regardless of CW or SSB operating mode.

The TUNE function does work in CW mode only on all other 60m channels.  The MOX function works on all 60m channels except CH-3. 

To adjust an antenna tuner, I have found the TUNE function only works in CW mode.  MOX function can be used with single tone SSB modulation as well.

Why is the TUNE function locked out on all 60m channels when in SSB mode?

Comments

  • Jim K4JAF
    Jim K4JAF Member ✭✭
    edited August 2018
    This was answered several times on the reflector.  This is from Tim:  Here is the issue.  In USB mode, the TUNE carrier is on the suppressed carrier frequency (what is displayed in the slice frequency readout).  60m is a channelized band, so that frequency is technically always a band edge.  If you do a TUNE operation on that frequency, some of the RF emissions are outside of the channel (out of band).

    You need to change to CW to do a TUNE operation or tune up in frequency about 100 Hz and it will work






  • Geoff_W8GNM
    Geoff_W8GNM Member ✭✭
    edited August 2018
    I found the problem with CH-3.   The new CH-3 frequency assignment is 5357.0 kHz and not 5366.5kHz.  TUNE function now works in CW mode, but not MOX mode.
  • Geoff_W8GNM
    Geoff_W8GNM Member ✭✭
    edited August 2018
    OK Jim-K4JAF, thanks for the explanation. 73, Geoff

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories