Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Fast SO2R switching now possible with new 2.2.8

Options
Member ✭✭
edited November 2019 in FLEX-6000 Signature Series
As some already have indicated version 2.2.8 is really an improvement also in the field of SO2R switching. I have only tested it in  remote mode (with 4G 30 ms latency) and I can see the difference. Now doubt. So to all CW SO2R Flex users - Christmas seems early this year :)  
Cudos to the Flex team!!  

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • Member ✭✭✭
    edited November 2019
    This by far is my favorite like of 2.2. I’ve tested it through several contests and it works excellent.
  • Member ✭✭
    edited May 2018
    Yes this was a big advancement for the contesting group.  I was quite pleased with the improvements that had been a long time coming.
  • Member ✭✭
    edited January 2019
    Oh I see. Great. How short CW delay times do you use without getting timing conflicts when switching? 
  • Member ✭✭
    edited January 2019
    Låter **** det där Kari. Jag ska försöka prova lite SO2R med min 6700 framöver. Kör bara SSB så blir kul se hur det fungerar. Har skaffat ett Expert 1 kFa nu som S&P PA. Ska bara löda upp lite kabel så blir det att prova. /Johan Sorry all English speaking Flexianian friends, regard above as a Swedish language test :)
  • Administrator, FlexRadio Employee admin
    edited October 2018
    Google Translate slays all language barriers (mostly)!

    Sounds good that Kari. I will try to try some SO2R with my 6700 in the future. Just drive SSB so it's fun to see how it works. Has acquired an Expert 1 kFa now as S & P PA. Just loose some cable and it will be a try. / Johan
  • Member ✭✭
    edited May 2018

    This is a little off the subject, but I feel like the folks at Flex are part of the family.


    Jim, K6QE

  • Member ✭✭
    edited May 2018
    Really close Tim :) I only do SSB, and I have to make a bit of cabling to connect from radio to PA. I hope you recover and get well. Love to be part of this community!
  • Member ✭✭
    edited November 2019
    Hello,
    could you provide a list of contesting software, in addition to N1MM, that can support Flex 6000 series in SO2R mode?I am going to learn SO2R mode and any suggestion would be apprecciated.

    Thank you very much
  • Member ✭✭✭
    edited May 2018
    The radio software supports OTRSP so any software that supports OTRSP will work. Ria
  • Member ✭✭
    edited May 2018
    Thank you very much.
    From the K1XM web site (http://www.k1xm.org/OTRSP/index.html) it seems they are N1MM, WriteLog and Win-Test

    73' Enzo



  • Member ✭✭
    edited May 2018
    Hej, Ja det är ju ett enorm lyft inte minst ratemässigt. Lycka till! 73
  • Member ✭✭
    edited May 2018
    Hi I have tested thoroughly on CW DXlog, N1MM and Writelog. All work very well. You better test in advance. In respect to DXlog you need to wait for next release though. 73s 
  • Member ✭✭
    edited May 2018
    Ska slå dig en signal i veckan som kommer. Har ju fortfarande inte hämtat mitt 40m kit till HyGain Exp 14 jag köpte förra, eller om det var förr förra sommaren. Ska upp med den snart, så må komma och hämta när jag kommer ner till Sth om några veckor.  73 /Johan

  • Member ✭✭
    edited May 2018
    Hello,

    during the we, as I am too far away from Dayton (HI HI), I developed a small utility that supports OTRSP protocol.
    I like very much 5MContest, a russian contest software, that, for what I know, doesn't support OTRSP.
    My program simply monitor the active (focused) window switching from Radio 1 to Radio 2 as the operator select the related window. It can also configure audio to listen only to the TX focused window, or it can select Stereo or RevStereo audio mode. Configuration is quite simple: you need to set up the beginning text of each window title and the serial port that supports the OTRSP protocol. Actually you can use it with each rig that supports OTRSP protocol and each contest software that uses a separate window for Radio 1 and Radio 2.
    I appreciate a lot the SO2R switching imprevement of 2.2.8 release as well.
    Thank you Ria for your great hint.

    73' Enzo
    iw7dmh

    image

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories