Welcome to the new FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

mic selected bug?

K5ROX Member ✭✭

Please advise if your flex does same.

6600  V2.1.33  win 7

I select "Mic" and transmit audio is fine and level meter functions as should since I have it enabled under   settings    radio setup      phone/cw.

If I select PC the meter no longer works but transmit audio is still fine.


  • K5ROX
    K5ROX Member ✭✭
    edited May 2018
  • Jim Osterling
    Jim Osterling Member ✭✭
    edited May 2018
    I'm working with Flex on a problem on pc input selection that doesn't appear when mic selected but not concerning the meter. An audio problem on receive and have no idea if they are or could be related.......
  • Tim - W4TME
    Tim - W4TME Administrator, FlexRadio Employee admin
    edited May 2018
    When using PC Audio, we make a Windows API call to read the mic level and then report that back on the SMartSDR console.  If the API call to your sound card fails, we do not get the data.  You may try updating your sound card drivers.  It might help.  Or not.
  • K5ROX
    K5ROX Member ✭✭
    edited May 2018
    Tim, If "PC" is selected for input audio and a microphone is connected to the "Mic" input and you have transmit audio, it has to be a bug does it not?

    My PC has no mic except for wireless headphone and there deffinately off  So if "PC" is selected I should have no audio on transmit from a microphone plugged into "Mic" on the back.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.