Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.1.5 | SmartSDR v4.1.5 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Factory reset question

Dave - W6OVP
Dave - W6OVP Member ✭✭
edited May 2020 in FLEX-6000 Signature Series
I'm going to sell one of my two 6300s and want to reset it to factory. It is currently standing alone. Can I just add power, press the button until the blinking white light appears and let it do it's thing, or do I have to attach it back to a computer and set it back up again in order to do this right?  TNX.  Dave W6OVP.

Answers

  • EA4GLI
    EA4GLI Member ✭✭✭
    edited November 2016
    No need to connect to a computer. Your first described approach will reset the radio to factory defaults with whatever version of the firmware you installed last. Good luck with the sale.
  • Jim Gilliam
    Jim Gilliam Member ✭✭
    edited September 2018
    I find this very vague. Do you first bring up SmartSDR using the computer, and, then, initiate the reset with the power button?
  • Ian1
    Ian1 Member ✭✭
    edited May 2020
    no computer needed to do a reset
  • EA4GLI
    EA4GLI Member ✭✭✭
    edited November 2016
    No to bringing up SmartSDR.

    This "Can I just add power, press the button until the blinking white light appears and let it do it's thing" will suffice.
  • N6OIL
    N6OIL Member ✭✭
    edited December 2016
    Page 21 has the reset procedure in your hardware manual.
  • Dave - W6OVP
    Dave - W6OVP Member ✭✭
    edited June 2017
    Got it. No computer needed. Thanks. -Dave.
  • Ken Davis
    Ken Davis Member ✭✭
    edited December 2016
    When you are ready to sell it, I might be interested depending on price and options.
    Ken
    W0KRD

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories