Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

smartSDR 1.4.16 crashes on 15 meters. It was working OK before until...

Options
Member ✭✭
Radio: Flex-6300
software: 1.4.16
Direct connection via NIC to computer

The radio was working fine. I had just selected 15 meter. I was adjust things and it suddenly stop working, by that I mean no audio output, there was data on the spectrum scope but nothing on the waterfall, and I lost complete control and then smartSDR crashed.

It displayed the "Connection Lost" popup box with the message "the connection to the radio was lost. Please reconnect". I click the OK button and the radio setup window appeared. It showed that my radio was already in use. So I could not reconnect. I also looked at the activity Ethernet LEDs on the computer and they flashing normal.

 I power cycled the radio and also rebooted my computer. I reconnected to the radio and it works fine on all bands but 15 meters. Whenever I switch to 15 meters, smartSDR crashes in the way described above.

Welcome!

It looks like you're new here. Sign in or register to get started.

Comments

  • Member ✭✭✭
    edited July 2018
    Is it crashing during transmit? If so  I would suggest you have RF getting into the radio or RF getting into the network cable causing it to loose connection.
  • Member ✭✭
    edited December 2016
    No, not during transmit.  in receive mode. Like I said up until tonight it was all good.
  • Member ✭✭
    edited March 2018
    I'm running 1.4.16.63 with no issues at all.
  • Administrator, FlexRadio Employee admin
    edited March 2017
    Dave,

    I have converted this topic to a support HelpDesk ticket (http://helpdesk.flexradio.com) for expedited issue resolution.  Please export your profiles and attach it to the ticket e-mail you will be receiving shortly.  I believe there is something amiss in your profile that is causing a problem and I want to capture that data before we try to resolve it.

    If anyone else is experiencing an issue similar to this one, please submit a HelpDesk support ticket for issue resolution.

Leave a Comment