Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
Need the latest SmartSDR or 4O3A Genius Product Software?

SmartSDR v3.9.19 and the SmartSDR v3.9.19 Release Notes
SmartSDR v2.12.1 and the SmartSDR v2.12.1 Release Notes

The latest 4O3A Genius Product Software and Firmware
If you are having a problem, please refer to the product documentation or check the Help Center for known solutions.
Need technical support from FlexRadio? It's as simple as Creating a HelpDesk ticket.

Smartsdr CAT Mute Command

Options
Member ✭✭
edited November 2017 in SmartSDR CAT
Is there a SSDR CAT command that will allow me to mute / unmute the receiver audio ?

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Answers

  • Member
    edited April 2015
    I don't know about a cat command... but why not just click the speaker icon to mute the receive audio???
  • Member ✭✭
    edited February 2017
    I am looking to control mute via a Flex Control or another external device.

    When using a 30" Monitor at 2560x1600 its not always the easiest thing to click the tiny icon at the top of the screen.

    If you study systems that have gone touch screen such as iPhone, iPad or car sound systems, you will notice designers provide physical controls for basic features such as volume, mute, etc. As convenient as digital interfaces are, most people still prefer rotary dials for volume and push buttons for quick access to specific functions.

  • Administrator, FlexRadio Employee admin
    edited March 2017
    No, there is not a CAT command for muting the audio in SmartSDR.
  • Member ✭✭
    edited December 2016
    Thanks Tim. Not sure if you have had this request before it might be worth considering. 

  • Member ✭✭✭
    edited November 2017
    Lee,
      If your running DDUtil you could try DD6MAM0; DD6MAM1;
    Al, K0VM 
  • Member ✭✭
    edited February 2017
    Al, I don't know how but you NAILED it !  That works.

    Thanks
  • Member ✭✭
    edited July 2016
    See http://k5fr.com/binary/DD6macrosSummary.pdf.  Lots of neat stuff with DDUTIL

  • Member ✭✭
    edited July 2016
    All,

    I'm trying to use these (DD6) DDUTIL commands, but none of them work.  Not sure what I'm doing wrong.  DDUTIL is connected and I set my software to talk to RPC1 in DDUTIL setup.  Normal ZZ CAT commands work, but all the DD6 commands do nothing.  What am I missing here?

    W4WHL

Leave a Comment

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories