Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.18 | SmartSDR v4.2.18 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Radio update failed. This SmartSDR version is incompatible with the selected Radio's Model?

Martin Smith
Martin Smith Member
edited October 2019 in FLEX-6000 Signature Series
Just had this error message on installing 1.3.0, runs 1.2.17 ok. Any help would be appreciated

Answers

  • George KF2T
    George KF2T Member ✭✭✭
    edited February 2019
    Try powering the radio off, removing power for a few minutes (5-10 is plenty), then trying your upgrade again.
  • Martin Smith
    Martin Smith Member
    edited February 2017
    Hi George, very quick reply ;-). Have tried as you suggested with no luck.
  • KY6LA_Howard
    KY6LA_Howard Member ✭✭✭
    edited January 2017
    Martin Are you sure you are using the correct version of SSDR This is a common error The desktop icon is likely pointing to an older version Use the start menu Start--->. Flex radio. --->. SSDR 1.3.
  • Ernest - W4EG
    Ernest - W4EG Member ✭✭
    edited October 2019

    Martin,

    Try to do a complete reset of the radio.  Here is how it is done  on the Flex-6700 series.

    1. Power off the radio

    2. Press and hold the OK button

    3. Momentarily Press and release the power button

    4. On the console display you will see a message "resetting the radio back to factory default."

    5. Keep holding the OK button until the power LED turns white, then release the OK button.

    6. Allow the radio to boot normally.

    This may help, or try to installing SmartSDR if the problem persist.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories