Welcome to the FlexRadio Community! Please review the new Community Rules and other important new Community information on the Message Board.
The latest SmartSDR Software:
SmartSDR v4.2.20 | SmartSDR v4.2.20 Release Notes
SmartSDR v3.10.15 | SmartSDR v3.10.15 Release Notes

The latest 4O3A Genius Product Software:
The latest 4O3A Genius Product Software and Firmware
How to Receive Technical Support::
If you are needing assistance with FlexRadio products, please refer to the product documentation or check the Help Center for known solutions. Need technical support from FlexRadio? It's as simple as creating a HelpDesk ticket.

Initial DSP observations for v0.16.4

Options
Ken - NM9P
Ken - NM9P Member ✭✭✭
edited June 2020 in SmartSDR for Windows
NR does cut down on noise, but it severely colors the receive audio on SSB. Thankfully I can change the RX EQ and make stations understandable again. I haven't noticed much change with the adjustment slider. I am not sure what parameter it is changing. I need to run more tests. It did seem to make weak CW signals a bit more easy to copy on a noisy 40 meters last night. ANF, on the other hand seems to be very effective, quickly blanking a S9+10 CW signal down to nothing but thumps with a microsecond tone burst at the beginning of each element as the notch finds it again. If the notch would persist for a half a second or so after the offending signal signal disappeared, then it would completely blank out even a CW signal. This will be handy to fight off the QRM'ers jamming the nets, etc. I didn't have my usual power line noise last night in order to test the NB. I look forward to seeing how effective it now is. (But I hope I don't need to!) So far, all three are a good improvement over V. 0.15.3 and the previous ones.

Comments

  • Sergey R5AU
    Sergey R5AU Member ✭✭
    edited April 2017
    Options
    Ken, i can confirm you test NB - no chance to test - no power line with noise at the moment, but in combination with NR and both slider in high position - audio blocked ANF - effective on strong signal only, low level carrier or CW signal both well copy NR - one level of the noise reduction(but not sure this is a noise reduction) - no reaction on slider. DSP definitely is a point for attention again and again!
  • Ken - NM9P
    Ken - NM9P Member ✭✭✭
    edited June 2020
    Options
    Pardon the spelling....Opservations = Observations ...my **** fingers occasionally miss the keys and I haven't found out how to edit a subject title! In any case, I haven't tested the ANF on very weak signals. I assume that the slider adjustment will set a threshold for this function. NB... I had noise for four days before getting the new V. 16.4 release. The night I made the download, the power lines were quiet. Go figure!
  • Michael N6BRP
    Michael N6BRP Member
    edited April 2019
    Options
    ANF seems to work well on USB but I don't seem to see any affect when using LSB, but I need to test this further!
  • Gerald-K5SDR
    Gerald-K5SDR FlexRadio Employee ✭✭
    edited December 2016
    Options
    Already fixed in 0.17.4 earlier this week. Thanks.

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.

Comment As ...

Categories