Three odd behaviors using the Flex control knob

More "testing" results for the software guys... 1) As I tune to either end of the display and the display begins to scroll, there are momentary hic-ups in the audio... split second drop-outs. They reoccur every 5-8 kHz or so as I continue to tune. 2) When I have two panadapters open, in this case the top on 80 and the bottom on 10 meters.... As I tune on 80 with the flex control knob the lower pan window shows and increased, spiky "noise" all across the display until I stop tuning, then goes back to normal. 3) There have been some times, especially when tuning through SWL bands using a very wide spectrum pan, that the flex control will stop responding for a couple of seconds, then rush to catch up long after I have stopped tuning. Then it begins acting very sluggishly and unpredictably. Ken - NM9P BTW - I am having a lot of fun.. getting great audio reports. nice receive, and did I say this is a heck of a lot of fun. But I am going to give this rig the run through for a couple of days in order to "earn my keep" for the early release.